Unlike other sections of the XML, host XML nodes have node names which reflect the type of the host: siLock (for MOVEit DMZ), FTP, SSHFTP, FileSystem, SMTP, POP3, AS1, AS2, or AS3.
It is not necessary to include a FileSystem host in the TaskXML; if none is included, the configured FileSystem host is used.
Host elements have the following attributes:
| Attribute | Description | Hosts |
| AddCom | The default additional commands ("quote" commands) sent before each transfer. | FTP |
| AddComAX | The default additional commands ("quote" commands) sent after each transfer. | FTP |
| AddComSignon | The additional commands ("quote" commands) sent right after signon. | FTP |
| AdjDST | 1 if this host's timestamps will change when Daylight Savings goes into (or out of) effect. | DMZ, FTP, SSH, Filesystem |
| AS1HostID | The ID of the related AS1 host, if applicable. | AS2 |
| AuthOrder | An optional string like "tls|tls-x|ssl" specifying
the order in which we should try AUTH commands if using explicit SSL. This is for maximum flexibility
with unusual FTP servers. The tokens in this string have these meanings: "tls" - Try AUTH TLS, followed by PROT P if nec. "tls-x" - Try AUTH TLS-P or TLS-C. "ssl" - Try AUTH SSL, also switching to SSL instead of TLS. "tls-y" - Try the opposite of the current type; e.g., if current type is TLS-P, try AUTH TLS-C. |
FTP |
| CmpL | SSH compression level; 0-9. Defaults to 6. | SSH |
| CustomDir | 1 if column-based custom directory parsing is being used. | FTP, SSH |
| CustomDirSkipTop | The number of lines that should be skipped at the top of a directory listing. Applies only if CustomDir is 1. | FTP, SSH |
| CustomDirSkipBottom | The number of lines that should be skipped at the bottom of a directory listing. | FTP, SSH |
| CustomDirColFilename | The column number of a filename in a directory listing. | FTP, SSH |
| CustomDirColDate | The column number of a data in a directory listing. | FTP, SSH |
| DefAB | "ascii" or "binary". | FTP |
| DefAccount | The default FTP "account". This is rarely used. | FTP |
| DefAddressFrom | The From: address for emails to this SMTP host. | SMTP |
| DefBlindDL | 1 if downloads from this host should be "blind" by default (no directory listing). | FTP, SSH |
| DefClientCertStore | The default client certificate store, typically "My". | DMZ, FTP |
| DefClientCertSubject | The subject name of the default client certificate. | DMZ, FTP |
| DefClientCertSHA1 | The SHA1 of the default client certificate. | FTP, SSH |
| DefClientKeyID | The ID of the default SSH key. | SSH |
| DefMxBy | The default maximum number of bytes to download from this host in one task run. 0 means infinite. | DMZ, FTP, SSH, Filesystem |
| DefMxFi | The default maximum number of file to download from this host in one task run. 0 means infinite. | DMZ, FTP, SSH, Filesystem |
| DefMD5File | The filename of the MD5 file, if MD5 files are being used. | FTP, SSH |
| DefMD5Get | "IfPresent", "Required", or "Never". Determines whether to download and process an MD5 file. | FTP, SSH |
| DefPartnerName | The default partner name. | AS1, AS2, AS3 |
| DefPassive | 1 if transfers should be in passive mode by default. | FTP |
| DefPassword | The default password for this host. This string is encrypted. | DMZ, FTP, SSH |
| DefRescanSecs | The default number of seconds between rescans of this host. The default of 0 disables this feature. | FTP, SSH, Filesystem |
| DefRetryCount | The default number of retries. | All |
| DefRetryTimeoutSecs | The default number of seconds between retries. | All |
| DefSort | The default sort order for filenames. This is a string of form 1,2 where 1 is Date, Size or Filename and 2 is A or D (for Ascending or Descending). | DMZ |
| DefUsername | The default username. | Most |
| DirScriptID | If specified, the custom directory parsing script to use. | |
| DMZHostID | The host ID of the associated MOVEit DMZ host. | AS1, AS2, AS3 |
| ForceNonLumpHash | 1 if uploads should be done in NonLumpHash mode, which is necessary for certain poorly-programmed firewalls. | DMZ |
| Host | The hostname. | All |
| ID | The ID by which this host is referred by sources and destinations. | All |
| ID2 | One or more IDs referring to alternate hosts for this particular host. | Most |
| IgnoreCertProbs | 1 if certain types of certificate problems, such as hostname mismatch, should be ignored. | DMZ, FTP |
| MDNPollCount | The number of attempts a task should make to retrieve an MDN after a send. | AS1, AS2, AS3 |
| MDNPollTimeoutSecs | The number of seconds between MDN polls. | AS1, AS2, AS3 |
| Name | The name of the host | All |
| NATUseServerIPForData | 1 if the FTP client should connect to the IP address on the command socket rather than that given in the response to PASV. | FTP |
| NATClientIP | The IP address that Central should present during active mode FTP. If not specified, use the host's IP. | FTP |
| PASVWS | The number of seconds that Central should pause before connecting to a passive port. This is a very obscure attribute needed only by certain buggy FTP servers. | FTP |
| PauseRerunSecs | The number of seconds to wait before automatically rerunning a task after a successful download. | AS1, AS3 |
| Port | The TCP port number of the host. | DMZ, FTP, SSH |
| ScriptPath | The script path used to create the URL for the server. | DMZ |
| Secure | For DMZ hosts, 1 if SSL should be used. For FTP hosts, one of the strings "on", "1", "ssl", "tls-p", "on-ccc", "tls-p-ccc", "off", "none", "0", "tls", "tls-c", "tls-c-ccc", "implicit", "implicit-ccc". | DMZ, FTP |
| SSHFingerprint | The approved SSH fingerprint of the host's SSH key. | SSH |
| UseNotif | 1 if notifications should be used. | DMZ, Filesystem |
| UTCOffset | The number of seconds of time zone difference between this host and Coordinated Universal Time. Rarely used. | DMZ, FTP, SSH, Filesystem |
| RenameAfterUpload | 1 if Central should upload as a temporary name, then rename to the final name. | FTP, Filesystem |
| TempUploadName | The temporary filename to use if RenameAfterUpload is in effect. | FTP, Filesystem |