SSH - Specific Clients - OpenSSH Windows

Preparation

This guide assumes you have already installed a copy of OpenSSH for Windows.

If you have not already installed OpenSSH for Windows, be sure to UNCHECK the Server box on the Choose Components section during the installation of this client.

Instructions

Select or CREATE a directory where the OpenSSH known_hosts and key files will be located (\Program Files\OpenSSH\bin\ssh is a good choice). We will refer to this directory as SSHDIR throughout this guide. When referenced in a command, be sure to substitute in your value.
Open a command-prompt, navigate to the \Program Files\OpenSSH\bin directory, and execute the following command:
sftp -oUserKnownHostsFile=SSHDIR\known_hosts user@host

This will come back with a warning that the host is not known. Enter yes to the question. This will add the host's key to the known_hosts file. Then, simply press CONTROL+C to leave the application.

Example:

C:\Program Files\OpenSSH\bin>sftp -oUserKnownHostsFile=C:\Progra~1\OpenSSH\bin\ssh\known_hosts
sshkeyboy@dotnet.corp.stdnet.com

Connecting to dotnet.corp.stdnet.com...
The authenticity of host 'dotnet.corp.stdnet.com (192.168.3.15)' can't be established.
RSA key fingerprint is ce:08:6f:28:87:b6:50:f4:84:e5:37:c2:68:89:33:2a.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'dotnet.corp.stdnet.com,192.168.3.15' (DSA)
to the list of known hosts.
sshkeyboy@dotnet.corp.stdnet.com's password:

(CONTROL+C)

C:\Program Files\OpenSSH\bin>
Execute the following command:
ssh-keygen -t rsa

When asked to enter a file to save the key in, use this value:

SSHDIR\id_rsa

When asked for a password, simply hit enter (and again when asked to confirm). This will create an RSA key which will be used to authenticate to the server. The ssh-keygen program should give the key files their correct permissions automatically.

Example:

C:\Program Files\OpenSSH\bin>ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (P7 $"/.ssh/id_rsa): c:\progra~1\OpenSSH\bin\ssh\id_rsa
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in c:\progra~1\OpenSSH\bin\ssh\id_rsa.
Your public key has been saved in c:\progra~1\OpenSSH\bin\ssh\id_rsa.pub.
The key fingerprint is:
44:a8:8c:88:3f:3f:91:8a:16:07:e4:c6:4a:6e:b8:df xxxx@jglshuttle

C:\Program Files\OpenSSH\bin>
Execute the following command:
sftp -oUserKnownHostsFile=SSHDIR\known_hosts -oIdentityFile=SSHDIR\id_rsa user@host

This will come back asking for the user's password. Simply Control-C out of the program at this point.

Example:

C:\Program Files\OpenSSH\bin>sftp -oUserKnownHostsFile=c:\progra~1\OpenSSH\bin\ssh\known_hosts -oIdentityFile=c:\progra~1\OpenSSH\bin\ssh\id_rsa sshkeyboy@dotnet.corp.stdnet.com
Connecting to dotnet.corp.stdnet.com...
sshkeyboy@dotnet.corp.stdnet.com's password:

(CONTROL+C)

C:\Program Files\OpenSSH\bin>
The new key's fingerprint should now be logged on the MOVEit Transfer host. Log on through the web interface as an administrator, click up the user's profile, go into the user's SSH policy, and ACCEPT the SSH key from the client key holding tank. (The key fingerprint is circled in RED in the image below.)

Open the user's profile and under User Authentication > SSH Policy > Current SSH Keys, add this fingerprint. A properly configured user will have a profile similar to the following:
You should now be able to automatically connect to the MOVEit Transfer host via SFTP using the following command:
sftp -oUserKnownHostsFile=SSHDIR\known_hosts -oIdentityFile=SSHDIR\id_rsa user@host

Example:

C:\Program Files\OpenSSH\bin>sftp -oUserKnownHostsFile=c:\progra~1\OpenSSH\bin\ssh\known_hosts -oIdentityFile=c:\progra~1\OpenSSH\bin\ssh\id_rsa sshkeyboy@dotnet.corp.stdnet.com
Connecting to dotnet.corp.stdnet.com...
sftp> pwd
Remote working directory: /Home/SSH Key Boy
sftp> cd ..
sftp> cd ..
sftp> dir
Distribution
Home
WebPost
sftp>
To use SFTP in an automated setting, use the -b command-line option to supply SFTP with a list of commands to be issued.

Example:
C:\>type sftp_commands.txt
cd /Home/Steve
put certreq.txt
dir
quit

C:\>c:\progra~1\openssh\bin\sftp
-oUserKnownHostsFile=c:\progra~1\openssh\bin\ssh\known_hosts -oIdentityFile=c:\progra~1\openssh\bin\ssh\id_rsa -b sftp_commands.txt steve@dotnet.corp.stdnet.com
Connecting to dotnet.corp.stdnet.com...
sftp> cd /Home/Steve
sftp> put certreq.txt
Uploading certreq.txt to /Home/Steve/certreq.txt
sftp> dir
DecSet_6858908.exe
MIFreelyInst_9971297.exe
brain_1731860.wav
certreq_1140952.txt
decryptedFile_5848271.dat
dmz_backups_2157003.html
webpost_bundle_4594384.xml
sftp> quit