| MessageWay Service Interface API |
Installing the MessageWay Server
Maintenance Release:
1) Download the Maintenance Release install package sent by Progress.
2) Logon to
the application server as the user that
"owns" the MessageWay services.
3) Copy the
Maintenance Release install package to the application server and unzip.
4) Step 3 will automatically
create a new subdirectory named after the Maintenance Release install package.
5) Stop the MessageWay Messaging Server
service and close the Windows Event Viewer.
6) If you have
MWTranslator 6.2 installed, this manual step is required to save the
6.2 trm.dll:
6a) Go to C:\Program Files (x86)\MessageWay\bin
(or equivalent) subdirectory
6b) Copy file
trm.dll to trm-62.dll (it will be copied back in step
12 below)
7) Locate and run the install program (messageway-6.1.0-mr09-win32.exe)
in the subdirectory structure created in step 3 (...\messageway_mrs\windows\).
8) Answer the prompts as they appear.
9) From a command line, cd to the C:\Program Files
(x86)\MessageWay\utils (or equivalent) subdirectory.
10) Convert the
database to support new functionality by running the convert database script:
DBCONVERT.EXE -u <your DB user> -p <your DB password>
-o dbconvertmr09.log
where <your DB user> is the user with access
to the MessageWay database and
<your DB password> is the password for the user with access to
the MessageWay database.
NOTE: If Windows Authentication is
being used to access the database, you can omit
-u <your DB
user> -p <your DB password>
11) After DBCONVERT.EXE has finished,
review the dbconvert.log and the dbconvertmr09.log
to ensure the database was upgraded properly. These log files are
located in the C:\Program Files (x86)\MessageWay\utils (or
equivalent) subdirectory. Resolve any errors
encountered in either log file before continuing with these instructions. An
empty dbconvertmr09.log means that no errors were written to
'stdout', but errors may still have been written to dbconvert.log.
12) If you have MWTranslator 6.2 installed, this
manual step is required to copy back in the 6.2 trm.dll:
12a) Go to C:\Program Files (x86)\MessageWay\bin (or equivalent)
subdirectory
12b) Rename file
trm.dll to trm-61.dll
12c) Copy file trm-62.dll
to trm.dll
13) Start the MessageWay Messaging
Server service.
14) If you have MWReporting installed,
this manual step is required to support 128 character Class Id's on datamart
table messageshistory:
14a) Stop MWReporting.
14b) Logon to the database server where the MWReporting
datamart (or equivalent) is installed as the "user" that owns
the datamart database.
14c)
Run the following SQL command against your datamart database:
alter table
messageshistory alter column ClassId nvarchar(128);
14d) Start
MWReporting.
The Maintenance
Release is now installed on the server. A backup copy of every replaced object was saved in the \Program Files
(x86)\MessageWay\bin\backups subdirectory.
To verify that the
Maintenance Release installed properly, view the \Program Files
(x86)\MessageWay\updates\ChangeLog.txt file. That file is updated whenever an
Maintenance Release is installed.
Additionally, this Maintenance Release Readme file is saved in the \Program Files
(x86)\MessageWay\updates subdirectory for future reference.
Regarding any sample config files that may be part of this Maintenance
Release, in-use config files should always be compared against newly installed
sample config files in order to make any necessary modifications, as well as to
incorporate new parameters and updated comments.
NOTE: you do not need to run CONVERTARCHIVE.EXE
utility if it has already been run as a result of installing 6.1 MR05 or MR06.
IMPORTANT notes about using CONVERTARCHIVE.EXE
utility. After this Maintenance Release has been installed and
MessageWay restarted, you will want to convert any archive zip files to support
the new Retrieve from Archive functionality using CONVERTARCHIVE.EXE
as follows:
1) Logon to the application server as
the user that "owns" the MessageWay services.
2) From a command line, cd to the C:\Program Files
(x86)\MessageWay\utils (or equivalent) subdirectory.
3) Convert the
archive zip files to support new Retrieve from Archive functionality by running
the convert script:
CONVERTARCHIVE.EXE -u
<your DB user> -p <your DB password> -o convertarchivemr09.log
where <your DB user> is the user with access
to the MessageWay database and
<your DB password> is the password for the user with access to
the MessageWay database.
NOTE: If Windows Authentication is being used to access the
database, you can omit
-u <your DB user> -p <your DB password>
To verify that CONVERTARCHIVE.EXE ran correctly, view the
convertarchive.log and convertarchivemr09.log located
in the same subdirectory where CONVERTARCHIVE.EXE was ran from. Resolve any errors encountered in either log file. An
empty convertarchivemr09.log means that no errors were written
to 'stdout', but errors may still have been written to
convertarchive.log.
The amount of time required to run
this utility depends on how many archive zip files need to be converted and the
amount of available resources on both the application server and the database
server.
Additional Install Procedures:
This install updates base adapters and services only. You must manually update any
additional adapters or services you may have. For example, if you have installed additional
MWSFTP adapters such as MWSFTP-B, you must use a command line to execute the
install command manually for each additional adapter. Note that best practice is
to use the same case as you see in MessageWay Manager whenever you type the name
of an adapter.
From the MessageWay install directory, which on a 64-bit system is typically
c:\Program Files (x86)\messageway\bin, the command would be similar to the
following:
mwsftp --install MWSFTP-B
The adapters and services affected by this maintenance release that require
Additional Install Procedures are:
MWAS2
MWAWSS3
MWDisk
MWDistList
MWEmail
MWFTP
MWRules
MWSFTP
MWTranslator
( January 5, 2021 ) Issues closed in
messageway-6.1.0-mr09-win32
IMPORTANT NOTE about Security Updates for this release:
MessageWay now includes the OpenSSL 1.0.2u and FIPS 2.0.16 releases.
They
address many vulnerabilities that can be
found in the release notes on the OpenSSL.org site.
Specifically, see the
following link for further details about this release of OpenSSL:
https://www.openssl.org/news/openssl-1.0.2-notes.html
Specifically, see the following link for further details about this release of
FIPS:
https://www.openssl.org/docs/fips/SecurityPolicy-2.0.16.pdf
IMPORTANT NOTE about Operating System version support for this release:
MessageWay now supports Windows Server 2019 Standard.
IMPORTANT NOTE about Database version support for this release:
MessageWay now supports MSSQL Server 2019 using ODBC Driver 17 for SQL Server.
IMPORTANT NOTE about Ciphers, KEX Algorithms and HMACs support for
MWSFTP Adapter for this release:
Configurable fields for
Ciphers, KEX algorithms
and HMACs have been added to 'SFTP' tab of MWSFTP adapter as well as 'SFTP Auth'
tab of MWSFTP locations. For more details,
including supported values, refer to 'Ciphers & KEX Algorithms & HMACs used by
MWSFTP Adapter' article included with this
release.
MessageWay - Issue #968 (Program changed: dbconvert.exe - version
6.1.0.6)
Issue 968: Increase column length of message attribute 'Class
Id' from 64 to 128 characters on tables archivemessages, messages and
messageshistory (if MWReporting installed). Changes:
This
problem has been fixed.
MessageWay - Issue #978 (Program changed: mwadmin.exe - version
6.1.0.4)
Issue 978: Message counts in the Manager can get out-of-sync
with the message counts in the database (Messages table), so a utility is needed
to correct this. Changes:
This
problem has been fixed. A msgcountsync option has been added to the
mwadmin utility.
MessageWay - Issue #945 (Program changed: mwas2.exe - version
6.1.0.5)
Issue 945: Outbound messages from adapter fail when AS2 servlets
installed in Tomcat version 7.0.69 or newer. Changes:
This
problem has been fixed.
MessageWay - Issue #962, 971, 972 (Program changed: mwawss3.exe - version
6.1.0.7)
Issue 962: Increase queue timeout from 1 minute to 5 minutes to
better handle high volumes in processing queues. Changes:
This
problem has been fixed. NOTE: this change affects all
adapters.
Issue 971: In order to reduce CPU utilization when transferring
multiple large files in parallel, add ability to limit the transfer rate (in MB)
of inbound and outbound file transfers. Changes:
This
problem has been fixed. A 'Limit Rate' drop down (in MB increments) has
been added to 'AWSS3 Input' and 'AWSS3 Output' tabs on MWAWSS3 locations.
Issue 972: Add ability to specify 'bucket-owner-full-control'
ACL on outbound file transfers. Changes:
This
problem has been fixed. An 'ACL Required' check box has been added to
'AWSS3 Output' tab on MWAWSS3 locations.
MessageWay - Issue #970 (Program changed: mwexp.exe - version
6.1.0.5)
Issue 970: Utility should be putting XML encoded values for 0D
and 0A in exported output, not the actual characters 0D and 0A, which results in
CR and LF creating blank lines in text fields, Changes:
This
problem has been fixed.
MessageWay - Issue #5271 (Program changed: mwimp.exe - version
6.1.0.7)
Issue 5271: Utility does not correctly import adapter location
passwords greater then 15 characters, resulting in invalid password after
import. Changes:
This
problem has been fixed.
MessageWay - Issue #968 (Program changed: mwmsg.exe - version
6.1.0.14)
Issue 968: Increase length of message attribute 'Class Id' from
64 to 128 characters, and truncate 'Class Id' to 128 if more than 128 characters
encountered. Changes:
This
problem has been fixed.
MessageWay - Issue #1265 (Program changed: mwrules.exe - version
6.1.0.2)
Issue 1265: Regarding Rules Expression Builder, add new Source
of InputName, and add new Operators of beginswith, endswith and matches
for Source of InputName and Filename. Changes:
This
problem has been fixed.
MessageWay - Issue #952, 956, 960, 977, 979 (Program changed: mwsftp.exe - version
6.1.0.15)
Issue 952: Enhance adapter and locations to make Ciphers, KEX algorithms and HMACs configurable. Changes:
This
problem has been fixed. Configurable fields for Ciphers, KEX algorithms
and HMACs have been added to 'SFTP' tab of MWSFTP adapter as well as 'SFTP Auth'
tab of MWSFTP locations. NOTE: for more details,
including supported values, refer to 'Ciphers & KEX Algorithms & HMACs used by
MWSFTP Adapter' article included with this
release.
Issue 956: Post MR08 adapter crashes during initial handshake
using KEX Algorithm's diffie-hellman-group16-sha512 and
diffie-hellman-group18-sha512. Changes:
This
problem has been fixed.
Issue 960: Post MR08 adapter crashes during initial handshake
with Kubra SFTP server. Changes:
This
problem has been fixed.
Issue 977: Enhance error reporting to distinguish connection
errors generated by MWSFTP Adapter from connection errors generated by MWProxy
server. Changes:
This
problem has been fixed.
Issue 979: Add support for KEX Algorithm
diffie-hellman-group-exchange-sha256. Changes:
This
problem has been fixed. The adapter has been updated to use a newer
ssh.dll
to address multiple CVE issues, including support for KEX Algorithm
diffie-hellman-group-exchange-sha256.
MessageWay - Issue #980, 1033, 1034 (Program changed: mwsi.exe - version
6.1.0.35)
Issue 980: When a file upload is aborted or failed midway thru
the upload, subsequent uploads of the same filename result in '1008 Creation
Failure' errors. Changes: This
problem has been fixed.
Issue 1033: Regarding Web Client, when user does not have
download rights on Default Recipient, incorrect results are displayed on
Available, Downloaded and Canceled tabs. Changes:
This
problem has been fixed.
Issue 1034: 'Last Activity Time' on Sessions Log is not being
updated by Web Client connections via the MWSI. Changes:
This
problem has been fixed.
MessageWay - Issue #946 (Program changed: mwtrace.exe - version
6.1.0.3)
Issue 946: Utility should default to trace type asterisk (*) if
trace type is not specified when using -t (or --trace) switch on command line
trace. Changes:
This
problem has been fixed.
MessageWay - Issue #969 (Program changed: mwuser.exe - version
6.1.0.34)
Issue 969: Program crashes with segment fault under certain
conditions. Changes:
This
problem has been fixed.
MessageWay - Issue #1, 2, 955, 5296 (Program changed: trm.dll)
Issue 1: Program crashes when processing certain input files
containing repeating elements. Changes:
This
problem has been fixed.
Issue 2: The functionality to support multiple occurrences of a
composite element or simple element within a segment does not work correctly. Changes:
This
problem has been fixed.
Issue 955: Override settings for one partner should not carry
over to next partner in the same processing run (input file). Changes:
This
problem has been fixed.
Issue 5296: Generated control number contains extra trailing
space which increases by 1 each time the translation is submitted, resulting in
invalid translation (EDI) output. Changes:
This
problem has been fixed.
MessageWay - Issue #950
(Programs changed: libeay32.dll, ssleay32.dll)
Issue
950:
See Important Note about Security Updates for this release above.
MessageWay - Issue #951 (Program changed:
MessageWay Installation Guide)
Issue 951:
Updated documentation to reflect that Progress has
verified that MessageWay works correctly with Windows Server 2019 Standard and
MSSQL Server 2019 using ODBC Driver 17 for SQL Server.
MessageWay - Issue #947, 951, 967, 974, 1003 (Program changed: MessageWay Users Guide and Reference)
Issue 947: Update documentation to explain that tokens can
be used to construct folder names in the 'File Mask' field on MWAWSS3 output
locations.
Issue 951: Updated documentation to reflect that Progress has
verified that MessageWay works correctly with Windows Server 2019 Standard and
MSSQL Server 2019 using ODBC Driver 17 for SQL Server.
Issue 967: Update documentation to explain how to edit Rules
(expressions) outside of Expression Builder using a text editor.
Issue 974: Update documentation to better explain that when
Rescan option is used on MWDisk input locations, 'Input Now' is disabled by
design.
Issue 1003: Update documentation to explain that setting a low
polling interval (seconds) in MWAWSS3 input locations can cause excessive AWS
monetary charges.
( December 21, 2018 ) Issues closed in
messageway-6.1.0-mr08-win32
IMPORTANT NOTE about Security Updates for this release:
MessageWay now includes the OpenSSL 1.0.2p and FIPS 2.0.16 releases.
They
address many vulnerabilities that can be
found in the release notes on the OpenSSL.org site.
Specifically, see the
following link for further details about this release of OpenSSL:
https://www.openssl.org/news/openssl-1.0.2-notes.html
Specifically, see the following link for further details about this release of
FIPS:
https://www.openssl.org/docs/fips/SecurityPolicy-2.0.16.pdf
IMPORTANT NOTE about Operating System version support for this release:
MessageWay now supports Windows Server 2016 Standard.
IMPORTANT NOTE about Database version support for this release:
MessageWay now supports MSSQL Server 2016 using ODBC Driver 13 for SQL Server.
IMPORTANT NOTE about MQ Client version support for this release:
MessageWay now supports MQ Client version 9 (32-bit).
MessageWay - Issue #4372 (Program changed: mwas2.exe - version
6.1.0.4)
Issue 4372: AS2 Adapter not re-initializing variables in memory
when an outbound error occurs, causing the last successful MDN response still in
memory to incorrectly be written to the Misc. tab of the outbound message in
error. Changes:
This
problem has been fixed.
MessageWay - Issue #3406, 4385, 4402 (Program changed: mwdisk.exe - version
6.1.0.10)
Issue 3406: When MWDisk Adapter is trying to input a file that
does not exist, the error message generated is "Failure while attempting to copy
input file to message store", which is not very usefull when trying to determine
what the problem is. Changes:
This
problem has been fixed.
Issue 4385: MWDisk Adapter not inputting files from a remote
folder into MessageWay, but deleting them anyways, resulting in potential loss
of data. Changes: This
problem has been fixed.
Issue 4402: Trace token "Startup" does not display input location and
path for paths being validated by the MWDisk Adapter when it is
initially started. Changes: This
problem has been fixed.
MessageWay - Issue #4393 (Program changed: mwdistlist.exe - version
6.1.0.4)
Issue 4393: MWDistlist allows users to configure a MWDistlist
location to route messages to itself, causing an infinite loop. Changes:
This
problem has been fixed. If a user tries to configure a MWDistlist location
to route to itself, a pop-up is generated telling user this is not allowed.
MessageWay - Issue #4312 (Program changed: mwemail.exe - version
6.1.0.8)
Issue 4312: A PCI scan against MWEmail Adapter indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by disabling DES and 3DES ciphers.
MessageWay - Issue #4312 (Program changed: mwftp.exe - version
6.1.0.12)
Issue 4312: A PCI scan against MWFTP Adapter indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by disabling DES and 3DES ciphers.
MessageWay - Issue #4318, 4365, 4373 (Program changed: mwmsg.exe - version
6.1.0.13)
Issue 4318: MessageWay uses SQL statement TRUNCATE to clean out
several tables. TRUNCATE requires the same "special" user privilage as SQL
statement DROP, which is not acceptable for some of our customers. Changes:
This
problem has been fixed by using SQL statement DROP instead of TRUNCATE.
Issue 4365, 4373: Insufficient error handling when duplicate
Message ID encountered in MESSAGES table while using adapters.
Changes: This
problem has been fixed.
MessageWay - Issue #4318 (Program changed: mwrestart.exe - version
6.1.0.2)
Issue 4318: MessageWay uses SQL statement TRUNCATE to clean out
several tables. TRUNCATE requires the same "special" user privilage as SQL
statement DROP, which is not acceptable for some of our customers. Changes:
This
problem has been fixed by using SQL statement DROP instead of TRUNCATE.
MessageWay - Issue #4312, 4378, 4406 (Program changed: mwsftp.exe - version
6.1.0.11)
Issue 4312: A PCI scan against MWSFTP Adapter indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by disabling DES and 3DES ciphers.
Issue 4378: MWSFTP Adapter is incorrectly reading the
known_hosts file created by the native SFTP client before reading the "Server
Key Fingerprint" defined in the "SFTP Auth" tab of a MWSFTP location, and if a
match is found in the known_hosts file, there is a chance that the wrong host
key will be used, causing a connection failure. Changes:
This
problem has been fixed.
Issue 4406: MWSFTP Adapter is unable to receive files from a SSH
server of type SERV-U (receive permission denied error). Changes:
This
problem has been fixed.
MessageWay - Issue #4312 (Program changed: mwsi.exe - version
6.1.0.32)
Issue 4312: A PCI scan against MWSI Server indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by removing 3DES cipher from mwsi.conf.samp.
Customers will need to merge this change into their in-use mwsi.conf file.
The updated cipher list is: CipherList=ALL:!LOW:!EXP:!ADH:!IDEA:!3DES:@STRENGTH
MessageWay - Issue #4312, 4366 (Program changed: mwsi.conf.samp)
Issue 4312: A PCI scan against MWSI Server indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by removing 3DES cipher from mwsi.conf.samp.
Customers will need to merge this change into their in-use mwsi.conf file.
The updated cipher list is: CipherList=ALL:!LOW:!EXP:!ADH:!IDEA:!3DES:@STRENGTH
Issue 4366: Enable Public Key Authentication in MWSI config
file. Changes:
RequestClientCert and AgentFile have been enabled by default in
mwsi.conf.samp. Customers will need to merge these changes into their
in-use mwsi.conf file.
The updated parameters are: RequestClientCert=True and uncomment
AgentFile=/etc/messageway/certs/agents.
MessageWay - Issue #4318 (Program changed: mwtrace.exe - version
6.1.0.2)
Issue 4318: MessageWay uses SQL statement TRUNCATE to clean out
several tables. TRUNCATE requires the same "special" user privilage as SQL
statement DROP, which is not acceptable for some of our customers. Changes:
This
problem has been fixed by using SQL statement DROP instead of TRUNCATE.
MessageWay - Issue #4376, 4411 (Program changed: mwtranslator.exe -
version 6.1.0.6)
Issue 4376: Document reject in MWTranslator service is not
performing rollback correctly. Changes:
This
problem has been fixed.
Issue 4411: When MWTranslator service encounters "Record with
this control reference number is in use" condition, the PARCTRL record for the
partner in question is left in a "Busy" state and subsequent translations for
the same partner will fail. Changes:
This
problem has been fixed.
MessageWay - Issue #4312 (Program changed: mwuser.exe - version
6.1.0.33)
Issue 4312: A PCI scan against MWUser Server indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by removing 3DES cipher from mwuser.conf.samp.
Customers will need to merge this change into their in-use mwuser.conf file.
The updated cipher list is: CipherList=ALL:!LOW:!EXP:!ADH:!IDEA:!3DES:@STRENGTH
MessageWay - Issue #4312 (Program changed: mwuser.conf.samp)
Issue 4312: A PCI scan against MWUser Server indicates
vulnerability CVE-2016-2183 (Birthday attacks against TLS ciphers with 64bit
block size) also known as Sweet32. Changes:
This
problem has been fixed by removing 3DES cipher from mwuser.conf.samp.
Customers will need to merge this change into their in-use mwuser.conf file.
The updated cipher list is: CipherList=ALL:!LOW:!EXP:!ADH:!IDEA:!3DES:@STRENGTH
MessageWay - Issue #4385 (Program changed: MWayMessages.dll)
Issue 4385: MWDisk Adapter not inputting files from a remote
folder into MessageWay, but deleting them anyways, resulting in potential loss
of data. Changes:
This
problem has been fixed.
MessageWay - Issue #4118
(Programs changed: libeay32.dll, ssleay32.dll)
Issue
4118:
See Important Note about Security Updates for this release above.
MessageWay - Issue #4083, 4102, 4338, 4356 (Program changed:
MessageWay Installation Guide)
Issue 4083, 4102: Updated documentation to reflect that Ipswitch
has verified that MessageWay works correctly with
MSSQL Server 2016 using ODBC Driver 13 for SQL Server.
Issue 4338: Updated documentation to reflect that Ipswitch has
verified that MessageWay works correctly with Windows Server 2016 Standard.
Issue 4356: Updated documentation to reflect that Ipswitch has
verified that MessageWay works correctly with MQ Client version 9.0.5.0.
MessageWay - Issue #4083, 4102, 4338, 4356, 4366 (Program changed:
MessageWay Users Guide and Reference)
Issue 4083, 4102: Updated documentation to reflect that Ipswitch
has verified that MessageWay works correctly with
MSSQL Server 2016 using ODBC Driver 13 for SQL Server.
Issue 4338: Updated documentation to reflect that Ipswitch has
verified that MessageWay works correctly with Windows Server 2016 Standard.
Issue 4356: Updated documentation to reflect that Ipswitch has
verified that MessageWay works correctly with MQ Client version 9.0.5.0.
Issue 4366: Updated documentation to reflect that Ipswitch has
enabled Public Key Authentication in MessageWay by default.
( March 31, 2018 ) Issues closed in
messageway-6.1.0-mr07-win32
IMPORTANT NOTE about Security Updates for this release:
MessageWay now includes the OpenSSL 1.0.2n and FIPS 2.0.16 releases.
They
address many vulnerabilities that can be
found in the release notes on the OpenSSL.org site.
Specifically, see the
following link for further details about this release of OpenSSL:
https://www.openssl.org/news/openssl-1.0.2-notes.html
Specifically, see the following link for further details about this release of
FIPS:
https://www.openssl.org/docs/fips/SecurityPolicy-2.0.16.pdf
MessageWay - Issue #4320 (Program changed: mwemail.exe - version
6.1.0.7)
Issue 4320: If the %filename% token contains the underscore
character (_), and %filename% is used in the 'Subject' field or as the
'Attachment filename', the underscore is incorrectly replaced with a space
character in the resulting email. Changes:
This
problem has been fixed.
MessageWay - Issue #4335
(Program changed: mwftp.exe - version 6.1.0.11)
Issue 4335: Add a data
channel timeout when the monitor thread gets the DIR listing to prevent the
MWFTP Adapter from hanging indefinitely when a network issue occurs. Changes: A
new data channel timeout has been added to MWFTP Adapter. The timeout is
set to one minute for initial read and 2 minutes for all subsequent reads.
MessageWay - Issue #4226, 4304 (Program
changed: mwimp.exe - version 6.1.0.6)
Issue
4226: Import of file system locations results in allowed access
rights for each parent not being inherited by its immediate children. Changes:
This
problem has been fixed.
Issue
4304: Import of regular location folders with a location and
folder underneath creates duplicate security records for the location. Changes:
This
problem has been fixed.
MessageWay - Issue #4323 (Program changed: mwsi.exe - version 6.1.0.31)
Issue 4323: Need to
truncate leading and trailing spaces from ClassID for messages uploaded via
MWFTPD Server, MWSFTPD Server and SegWay Open. Changes:
This
problem has been fixed.
MessageWay - Issue #4322, 4326, 4330, 4342 (Program changed: mwuser.exe -
version 6.1.0.32)
Issue 4322: The View Logs security access right allows
users to execute a Find Logs query, but it does not allow users to view
individual log record details. Changes: This problem has been
fixed.
Issue 4326:
MWUser crashes with a seg 4 fault, core file is generated. Changes: This problem has been
fixed. Also increased the request buffer size for all requests to MWUser
from 32K to 64K to allow larger query requests.
Issue 4330,
4342:
The Find Locations, Find Rules and
Find Users options do not have a maximum rows returned value, resulting
in unacceptable performance and/or the Manager becoming unresponsive when tens
of thousands of rows are returned in the resulting query. Changes: The
maximum rows returned value for the Find Locations,
Find Rules and Find Users options has been hard coded
to 10,000.
MessageWay - Issue #4118
(Programs changed: libeay32.dll, ssleay32.dll)
Issue
4118:
See Important Note about Security Updates for this release above.
MessageWay - Issue #4231 (Program changed:
trm.dll)
Issue
4231: Standard Identification Rules regarding Sender should not
be case sensitive. Changes: This problem has been fixed.
( May 26, 2017 ) Issues closed in
messageway-6.1.0-mr06-win32
IMPORTANT NOTE about Security Updates for this release:
MessageWay now includes the OpenSSL 1.0.2j and FIPS 2.0.12 releases.
They
address many vulnerabilities that can be
found in the release notes on the OpenSSL.org site.
Specifically, see the
following link for further details about this release of OpenSSL:
https://www.openssl.org/news/openssl-1.0.2-notes.html
Specifically, see the following link for further details about this release of
FIPS:
https://www.openssl.org/docs/fips/SecurityPolicy-2.0.12.pdf
MessageWay - Issue #4252 (Program changed: mwarchive.exe- version
6.1.0.10)
Issue 4252: MWArchive version 6.1.0.8 crashes if 'Archive
Directory' is set to 'CSV File'. Changes: The 'Archive
Directory' in MR05 and beyond will be only Database. Therefore setting the
MWArchive Server Property 'Archive Directory' to 'CSV File' will not have any
effect post MR05. No changes have been made in the Manager to remove this
option at this time. The MWArchive program will no longer pay attention to the
'Archive Directory' setting in the Server property.
MessageWay - Issue #4076 (Program changed: mwas2.exe- version 6.1.0.3)
Issue 4076: Add ability to select which signing algorithm is
used for MDN. Changes: The field 'Sign Algorithm' has
been added to the AS2 tab of the AS2 Adapter location, which allows you to
select the signing algorithm to be used on the MDN. Valid signing
algorithms include sha1, md5, sha-256,
sha-384, sha-512, or sha-224.
NOTE: Although this new signing algorithm for MDN in the AS2
Adapter location requires the next release of our AS2 Servlets to be fully
functional, it is still compatible with our current AS2 Servlet release.
MessageWay - Issue #4267 (Program changed:
mwdisk.exe - version 6.1.0.5)
Issue
4267: On Windows operating systems, when 'filename already
exists' error is encountered during file output to disk, file is copied to
'temp' folder instead. Once original filename on disk is removed, next
delivery of same filename to disk causes file in 'temp' folder to be
concatenated to same filename on disk. Changes: This
problem has been fixed.
MessageWay - Issue #4259 (Program changed: mwdistlist.exe - version
6.1.0.3)
Issue 4259: When a distribution list location is configured to
reference a subsequent distribution list location, the location status of the
subsequent distribution list location is ignored. For example, if the
subsequent distribution list location status is 'On Hold' or 'Closed', these
statuses are ignored. Changes: A 'Non Recursive' check box
has been added to the Distribution List tab of the MWDistList service to fix this problem. The default
behavior is still 'Recursive'. NOTE: When checking or
unchecking the 'Non Recursive' check box, the MWDistList service must be
restarted for the change to take affect.
MessageWay - Issue #4269 (Program changed: mwemail.exe - version
6.1.0.6)
Issue 4269: Inbound (POP3) emails with only body (no attachment)
result in the Filename and Input Name attribute of the message being filled in
from a previous email in the same
location that did have an attachment. Also related to this issue, some
email clients do not fill in the name parameter of an email with attachment
correctly, causing the Filename attribute of the message to default to the
internal message store filename (MW<msg-id>.msg) and the Input Name attribute of
the message to default to blank. Changes:
This
problem has been fixed.
MessageWay - Issue #4244, 4246, 4262
(Program changed: mwftp.exe - version 6.1.0.10)
Issue 4244: Allow
restriction of TLS protocol to TLS 1.2 only. Changes: A
new field named 'TLS V1.2 only' has been added to adapter/location to allow restriction of
the TLS protocol to TLS 1.2 only.
Issue 4246:
See Important Note about Security Updates for this release above.
Issue 4262:
Force IP Address returned by a PASV response to be used for the data channel
connection. Changes: A new field named 'PASV IP' has been
added to adapter/location to force IP Address returned by a PASV response to be
used for the data channel connection.
MessageWay - Issue #4163, 4256, 4277 (Program changed: mwsftp.exe -
version 6.1.0.10)
Issue 4163: Update MWSFTP Adapter to libssh version 0.7.4
to address CVE-2016-0739: Bits/bytes confusion resulting in truncated
Diffie-Hellman secret length. Changes: This problem has been fixed.
Issue 4256: MWSFTP Adapter causing high CPU usage and/or
randomly aborting when tracing is enabled. Changes: This
problem has been fixed.
Issue 4277: Update MWSFTP Adapter to libssh version 0.7.4
to address connection incompatability with certain SFTP servers. Changes: This problem has been fixed.
Note: This issue was originally omitted from the MR06 release
notes.
MessageWay - Issue #4244, 4246, 4248,
4275, 4276, 4279 (Program changed: mwsi.exe - version 6.1.0.30)
Issue 4244: Allow
restriction of TLS protocol to TLS 1.2 only. Changes: The
mwsi has been changed to allow restriction of
the TLS protocol to TLS 1.2 only. The mwsi configuration file can be modified to include a param 'Tls12Only' which when set to 'True' limits the
SSL protocol to TLS 1.2 only. The default is 'False'. Please refer to the
new parameter in the sample configuration file mwsi.conf.samp. Copy and paste
the description from the comments section and the parameter into your
configuration file, and set the parameter to suit your needs. Don't forget to
restart your SI server to make any changes to your configuration file take
effect.
Issue 4246:
See Important Note about Security Updates for this release above.
Issue 4248: After an interrupted session, messages that
are canceled by the application are getting returned to an available status and
processed subsequent times. Changes: This problem has been fixed.
Issue 4275: Memory leak encountered in MWSI when parameter
CompressOutbound is set to True in MWFTPD perimeter server configuration file. Changes: This
problem has been fixed.
Issue 4276: Need to improve message download performance in
MWFTPD perimeter server when message to download is the result of a distribution
list. Changes: Unnecessary database interactions
were removed to service this type of download request.
Issue 4279: Need to improve message transfer performance in
perimeter servers. Changes: We identified
updates that occurred against the database more frequently than
required, such as Last Activity Time on the Session entry and Size on the
Message Header entry. We feel we
have maintained the functionality provided by the updates while being more
selective of how often these updates are done. We also identified socket
option changes that improved TCP connection throughput.
MessageWay -
Issue #4222, 4244, 4246, 4250, 4273 (Program changed: mwuser.exe - version 6.1.0.28)
Issue 4222: Various issues when displaying large messages
in the Manager. Changes: This problem has been
fixed.
Issue 4244: Allow
restriction of TLS protocol to TLS 1.2 only. Changes: The mwuser
server has been changed to allow restriction of
the TLS protocol to TLS 1.2 only. The mwuser configuration file can be modified to include a param 'Tls12Only' which when set to 'True' limits the
SSL protocol to TLS 1.2 only. The default is 'False'. Please refer to the
new parameter in the sample configuration file mwuser.conf.samp. Copy and paste
the description from the comments section and the parameter into your
configuration file, and set the parameter to suit your needs. Don't forget to
restart your mwuser server to make any changes to your configuration file take
effect.
Issue 4246:
See Important Note about Security Updates for this release above.
Issue 4250: Find Archive Messages in the Manager is
showing multiple occurrences of pre-MR05 archived message.
Changes: The mwuser server has been changed to exclude Archive Messages with a
NULL value in ArchiveFileIndex (pre MR05 archive messages). Running
convertarchive will update these messages to display correctly.
Issue 4273: Add audit logging for
Rules Processing definitions (routing). Changes: Additions,
updates and deletions of Rules Processing definitions are now being written to
the audit log.
MessageWay - Issue #4246
(Program changed:
libeay32.dll, ssleay32.dll)
Issue
4246:
See Important Note about Security Updates for this release above.
MessageWay - Issue #4163, (Program changed: ssh.dll)
Issue 4163: Update MWSFTP Adapter to libssh version 0.7.4
to address CVE-2016-0739: Bits/bytes confusion resulting in truncated
Diffie-Hellman secret length. Changes: This problem has been fixed.
MessageWay - Issue #4217 (Program changed:
trm.dll)
Issue
4217: Translator hangs when it encounters 30MB or greater xml
input files. Changes: This problem has been fixed.
MessageWay - Issue #4076, 4259, 4262, 4290
(Program changed: MessageWay Users Guide and Reference)
Issue
4076: Add ability to select which signing algorithm is
used for MDN. Changes: The field 'Sign Algorithm' has
been added to the AS2 tab of the AS2 Adapter location, which allows you to
select the signing algorithm to be used on the MDN. Valid signing
algorithms include sha1, md5, sha-256,
sha-384, sha-512, or sha-224.
NOTE: Although this new signing algorithm for MDN in the AS2
Adapter location requires the next release of our AS2 Servlets to be fully
functional, it is still compatible with our current AS2 Servlet release.
Issue
4259: When a distribution list location is configured to
reference a subsequent distribution list location, the location status of the
subsequent distribution list location is ignored. For example, if the
subsequent distribution list location status is 'On Hold' or 'Closed', these
statuses are ignored. Changes: A 'Non Recursive' check box
has been added to the Distribution List tab of the MWDistList service to fix this problem. The default
behavior is still 'Recursive'. NOTE: When checking or
unchecking the 'Non Recursive' check box, the MWDistList service must be
restarted for the change to take affect.
Issue
4262: Force IP Address returned by a PASV response to be used
for the data channel connection. Changes: A new field
named 'PASV IP' has been added to adapter/location to force IP Address returned
by a PASV response to be used for the data channel connection.
Issue 4290: MDTM (modtime) command not
implemented. Changes: The MDTM (modtime) command was added to
MWFTPD Server, and documentation was updated to include this new command.
( August 19, 2016 ) Issues closed in
messageway-6.1.0-mr05-win32
IMPORTANT NOTE about Security Updates for this release:
MessageWay now includes the OpenSSL 1.0.2h and FIPS 2.0.12 releases.
They
address many vulnerabilities that can be
found in the release notes on the Openssl.org site.
Specifically, see the
following link for further details about this release of OpenSSL:
https://www.openssl.org/news/openssl-1.0.2-notes.html
Specifically, see the following link for further details about this release of
FIPS:
https://www.openssl.org/docs/fips/SecurityPolicy-2.0.12.pdf
MessageWay - Issue #680 (Program changed:
mwarchive.exe - version 6.1.0.8)
Issue
680: Add 'Find Archive Messages', 'Retrieve from Archive' and
'Archive Directory Maintenance' functionality to MessageWay. Changes:
This
functionality has been added.
MessageWay - Issue #680 (Program changed:
mwarchretrieve.exe - version 6.1.0.2)
Issue
680: Add 'Find Archive Messages', 'Retrieve from Archive' and
'Archive Directory Maintenance' functionality to MessageWay. Changes:
This
functionality has been added.
MessageWay - Issue #4114 (Program changed:
mwcustomproc.exe - version 6.1.0.5)
Issue
4114: Insufficient error checking in custom proc service can
allow files with content to become messages with no content when copied into
message store. Changes:
This
problem has been fixed.
MessageWay - Issue #4191 (Program changed:
mwdisk.exe - version 6.1.0.4)
Issue
4191: Add 'Overwrite file' functionality to disk output. Changes: Added checkbox '[x]
Overwrite file' in the 'Disk Output'
tab to allow an output file to be overwritten if it already exists on disk.
MessageWay - Issue #4203 (Program changed:
mwimp.exe - version 6.1.0.5)
Issue
4203: Expand the 'Perform Message Actions' right to represent
each action the current right controls. Changes: The
'Perform Message Actions' right has been replaced with ''Resubmit Messages',
'Redirect Messages', 'Release Messages', 'Restart Receive' and 'Cancel Messages'
rights. Also, 'View Logs' right has been added to control access to Audit
Logs, Event Logs and Trace Logs.
MessageWay - Issue #680 (Program changed:
mwmsg.exe - version 6.1.0.12)
Issue
680: Add 'Find Archive Messages', 'Retrieve from Archive' and
'Archive Directory Maintenance' functionality to MessageWay. Changes:
This
functionality has been added.
MessageWay - Issue #4041, 4080, 4158, 4198,
4203, 4225 (Program changed:
mwsi.exe - version 6.1.0.22)
Issue
4041: Decouple Service Interface session timeout from Manager
timeout 'User Policies Logon Idle Lifetime'. Changes:
New parameter SessionTimeout has been added to mwsi.conf for each separate
listener section. This new parameter overrides Manager timeout 'User
Policies Logon Idle Lifetime', which was previously used to timeout an SI
listener session. Valid values are
in minutes, and if not specified, Manager timeout 'User Policies Logon Idle
Lifetime' is still used as the default.
Issue 4080: In the file system, users must incorrectly have
download rights in order to upload messages. But what if user should only
have upload rights but not download rights to file system mailbox? Changes: This
problem has been fixed.
Issue 4158:
FTP downloads fail when Class ID and NonStopCompat are both used. Changes: This
problem has been fixed.
Issue 4198:
SQL open cursor leak in service interface. Changes: This
problem has been fixed.
Issue
4203: Expand the 'Perform Message Actions' right to represent
each action the current right controls. Changes: The
'Perform Message Actions' right has been replaced with ''Resubmit Messages',
'Redirect Messages', 'Release Messages', 'Restart Receive' and 'Cancel Messages'
rights. Also, 'View Logs' right has been added to control access to Audit
Logs, Event Logs and Trace Logs.
Issue
4225: Transfer failure during a download results in message
status being marked as Canceled instead of Available. Changes: This
problem has been fixed.
MessageWay - Issue #680, 4203 (Program changed:
mwuser.exe - version 6.1.0.24)
Issue
680: Add 'Find Archive Messages', 'Retrieve from Archive' and
'Archive Directory Maintenance' functionality to MessageWay. Changes:
This
functionality has been added.
Issue
4203: Expand the 'Perform Message Actions' right to represent
each action the current right controls. Changes: The
'Perform Message Actions' right has been replaced with ''Resubmit Messages',
'Redirect Messages', 'Release Messages', 'Restart Receive' and 'Cancel Messages'
rights. Also, 'View Logs' right has been added to control access to Audit
Logs, Event Logs and Trace Logs.
MessageWay - Issue #4187 (Program changed:
trm.dll)
Issue
4187: Using Edibasic, the number of variables supported per
scope (global, local, document or map) is limited to 128. Changes:
The limit
per scope has been increased to 32,768.
MessageWay - Issue #680, 4191, 4203
(Program changed: MessageWay Users Guide and Reference)
Issue
680: Add 'Find Archive Messages', 'Retrieve from Archive' and
'Archive Directory Maintenance' functionality to MessageWay. Changes: This
functionality has been added.
Issue
4191: Add 'Overwrite file' functionality to disk output. Changes: Added checkbox '[x]
Overwrite file' in the 'Disk Output'
tab to allow an output file to be overwritten if it already exists on disk.
Issue
4203: Expand the 'Perform Message Actions' right to represent
each action the current right controls. Changes: The
'Perform Message Actions' right has been replaced with ''Resubmit Messages',
'Redirect Messages', 'Release Messages', 'Restart Receive' and 'Cancel Messages'
rights. Also, 'View Logs' right has been added to control access to Audit
Logs, Event Logs and Trace Logs.
(
April 13, 2016
) Issues closed in
messageway-6.1.0-mr04-win32
IMPORTANT NOTE about Security Updates for this release (Issue-4025,
4144):
MessageWay now includes the OpenSSL 1.0.1r and FIPS 2.0.11 releases.
They
address many vulnerabilities that can be
found in the release notes on the Openssl.org site.
Specifically, see the
following link for further details about this release of OpenSSL:
https://www.openssl.org/news/openssl-1.0.1-notes.html
Specifically, see the following link for further details about this release of
FIPS:
https://www.openssl.org/docs/fips/SecurityPolicy-2.0.11.pdf
MessageWay - Issue #4025, 4144, 4150 (Program changed:
mwdistlist.exe - version 6.1.0.2)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue 4150: Add token replacement for recipients defined in
a distribution list. Changes: This problem has been fixed.
MessageWay - Issue #4025, 4144, 4153 (Program changed:
mwemail.exe - version 6.1.0.3)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue 4153: Enhance adapter to support secure POP3 and SMTP
connections to email server. Changes:
Added checkbox '[x] Secure' in the 'POP3' and 'SMTP'
tabs to configure a secure connection to an email server.
MessageWay - Issue #4025, 4141, 4144 (Program changed:
mwexp.exe - version 6.1.0.4)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4141: Exporting large number of Folders can result in 'too many
open cursors' error, causing the export to fail. Changes:
SQL cursor leaks were found and fixed.
MessageWay - Issue #4025, 4124, 4129, 4144 (Program changed:
mwftp.exe - version 6.1.0.8)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4124: There is a memory leak on FTP data channel when data
channel is SSL, causing FTP Adapter to fail under heavy load conditions.
Changes: This problem has been fixed.
Issue
4129: When a remote file fails to be received into MWay because
of a 'connect' error or a 'failure to delete' error, the message is marked in
error, but the adapter does not try to receive the remote file on a later
polling interval. Other remote files in the same directory will be
received on a later polling interval, but not the one which caused the error,
until the adapter is restarted. Changes: This problem has
been fixed.
MessageWay - Issue #4025, 4141, 4144 (Program changed:
mwimp.exe - version 6.1.0.4)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4141: Importing large number of Folders can result in 'too many
open cursors' error, causing the import to fail. Changes:
SQL cursor leaks were found and fixed.
MessageWay - Issue #4025, 4108, 4144 (Program changed:
mwlogging.exe - version 6.1.0.2)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4108: If logging server is not able to make connection to
database, no retries are performed. Changes: Logging
server has been enhanced to attempt 5 retries at 5 second intervals before
generating an event.
MessageWay - Issue #4025, 4106, 4144 (Program changed:
mwsched.exe - version 6.1.0.7)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4106: File Receipt Monitor is generating false notifications
even though files have been received on time. Changes: This problem has been fixed.
MessageWay - Issue #4025, 4116, 4129, 4144 (Program changed:
mwsftp.exe - version 6.1.0.8)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4116: Add SHA256 MAC algorithm support to SSH. Changes:
This problem has been fixed.
Issue
4129: When a remote file fails to be received into MWay because
of a 'connect' error or a 'failure to delete' error, the message is marked in
error, but the adapter does not try to receive the remote file on a later
polling interval. Other remote files in the same directory will be
received on a later polling interval, but not the one which caused the error,
until the adapter is restarted. Changes: This problem has
been fixed.
MessageWay - Issue #4025, 4144, 4148 (Program changed:
mwsi.exe - version 6.1.0.20)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4148: Message status is not set correctly when an abort occurs
during message download (message status is set to cancelled). Changes:
Message status is now set back to the original status before the download was
attempted.
MessageWay - Issue #4025, 4144, 4149 (Program changed:
mwuser.exe - version 6.1.0.17)
Issue
4025, 4144: See Important Note about Security Updates for this issue above.
Issue
4149: Not able to view all trace records in Manager if there is
more than one record in the Trace Logs (Oracle only). Changes: This problem has
been fixed.
MessageWay - Issue #4025, 4144 (Program
changed: libeay32.dll)
Issue
4025, 4144:
See Important Note about Security Updates for this issue above.
MessageWay - Issue #4025, 4144
(Program changed:
ssleay32.dll)
Issue
4025, 4144:
See Important Note about Security Updates for this issue above.
MessageWay - Issue #4116
(Program changed:
ssh.dll)
Issue
4116:
Add SHA256 MAC algorithm support to SSH. Changes: This
problem has been fixed.
MessageWay - Issue #4153
(Program changed: MessageWay Users Guide and Reference)
Issue 4153: Enhance
Email adapter to support secure POP3 and SMTP
connections to email server.
Changes: The documentation has been updated to
include the added checkbox '[x] Secure' in the 'POP3' and 'SMTP' tabs to
configure a secure connection to an email server.
(May 15, 2015) Changes from
messageway-6.1.0-mr03
rolled into current Maintenance Release
IMPORTANT NOTE about Security Updates for this release (Issue-3975):
MessageWay now includes the OpenSSL 0.9.8ze and FIPS 1.2.2 releases.
They
address the following higher profile vulnerabilities and many others that can be
found in the release notes on the Openssl.org site.
CVE-2014-0160,
Heartbleed vulnerability, the OpenSSL 0.9.8.ze is not vulnerable to the issue
outlined in this CVE report.
CVE-2014-0224, SSL/TLS MITM
vulnerability, the OpenSSL 0.9.8.ze version contains the updates to address this
vulnerability.
CVE-2014-3566, POODLE vulnerability,
MessageWay no longer supports the SSLv3 protocol for secure sessions.
CVE-2015-0204, FREAK vulnerability, the OpenSSL 0.9.8.ze
version contains the updates to address this vulnerability.
IMPORTANT NOTE about known issue with Scheduling for this release (Issue-3347):
When Daylight Saving Time (DST) comes into effect for a schedule’s time zone, an
hour is skipped. When DST ends, an hour is repeated. To ensure that
schedule triggers are not skipped or repeated, try to avoid configuring schedule
start and end times in the two-hours window around the time when there are DST
adjustments.
IMPORTANT NOTE about known issue with Multi-system environment for
this release (Issue 4016):
In a Multi-system MessageWay environment,
while the Manager is connecting to different systems and the user attempts a
logon by clicking the Logon button from the toolbar (left most
icon), the Manager may get into a hung state. To avoid this issue, let the
Manager complete the connection before clicking on the Logon
button.
MessageWay - Issue #3914 (Program changed:
mwarchive.exe - version 6.1.0.2)
Issue 3914:
When the Archive program encounters a DB error, a corrupted archive zip file is
created. Changes: Now when the Archive program encounters
a DB error, any archive zip files created are deleted. Related entries in the
archive messages table are removed. Also, updates applied to the messages table
entries are backed out.
MessageWay - Issue #3958 (Program changed:
mwas2.exe - version 6.1.0.3)
Issue 3958: The
AS2 Adapter cores out when a message with missing payload is encountered.
Changes:
This problem has been fixed.
MessageWay - Issue #4040 (Program changed:
mwcompress.exe - version 6.1.0.4)
Issue 4040:
Unzipping a file that was zipped with JAVA JDK causes 0-length outputs to be
created instead of valid length outputs. Changes: JAVA
JDK is not setting the file attributes crc, compressed and uncompressed size in
the local file header. JAVA JDK does set these attributes in the Central
Directory Locator, so mwcompress was changed to use attributes from the Central
Directory Locator when not set in the local file header.
MessageWay - Issue #3924, 3925, 3939, 3961 (Program changed:
mwcustomio.exe - version 6.1.0.6)
Issue 3924:
When an input CustomIO location encounters an error, sometimes the message is
marked as Available instead of marked as Receive Error. Changes:
This problem has been fixed.
Issue
3925: When an input CustomIO location encounters an error and
marks a message as Receive Error, this causes a file open leak, eventually
resulting in a 'too many files open' issue. Changes: This problem has been fixed.
Issue 3939:
When large amounts of error information are generated by a CustomIO or
CustomProc location, this error information can slow down MessageWay to the
point that the MWCustomIO Adapter or MWCustomProc Service shuts itself down.
Changes:
This problem has been fixed.
Issue 3961:
A LNK line in a CustomIO or CustomProc status file creates a message alias for
the input message. To be consistent with output from a distribution list or
rules process location, the alias should be a child of the input message.
Currently, it's a sibling. This is because the message alias is created with its
Input Message ID set equal to its Message ID. Its Input Message ID should be the
same as the Input Message ID of the input message. Changes:
This problem has been fixed.
MessageWay - Issue #3939, 3961 (Program changed:
mwcustomproc.exe - version 6.1.0.3)
Issue 3939:
When large amounts of error information are generated by a CustomIO or
CustomProc location, this error information can slow down MessageWay to the
point that the MWCustomIO Adapter or MWCustomProc Service shuts itself down.
Changes:
This problem has been fixed.
Issue
3961: A LNK line in a CustomIO or CustomProc status file creates
a message alias for the input message. To be consistent with output from a
distribution list or rules process location, the alias should be a child of the
input message. Currently, it's a sibling. This is because the message alias is
created with its Input Message ID set equal to its Message ID. Its Input Message
ID should be the same as the Input Message ID of the input message.
Changes:
This problem has been fixed.
MessageWay - Issue #3997 (Program changed:
mwdisk.exe - version 6.1.0.2)
Issue
3997:
Event text not being logged with inbound monitoring error
event ERR_SYSTEM_IBMONITOR. Changes:
This problem has been fixed.
MessageWay - Issue #3975, 3995, 3997 (Program changed:
mwemail.exe - version 6.1.0.2)
Issue
3975: See Important Note about Security Updates for this issue above.
Issue
3995: Not able to deliver a message with an attached file when
file has a content type of audio/mpeg (message is stuck in a Sending state).
Changes:
This problem has been fixed.
Issue
3997:
Event text not being logged with inbound monitoring error
event ERR_SYSTEM_IBMONITOR. Changes:
This problem has been fixed.
MessageWay - Issue #3919, 3975, 3997, 4002,
4047 (Program changed:
mwftp.exe - version 6.1.0.5)
Issue 3919: Why
is an ''Inbound Messages Receipt Failure, attempting retry'' message written to
the system event log when retry is not enabled for a MWFTP or MWSFTP location?
Also why is a 'warn 5006' error written to the system event log instead of a
'fail 5007' error? Changes: The MWFTP and MWSFTP Adapters
have been modified to log appropriate errors when they encounter connection
failures versus directory configuration errors as follows:
A new 'warning
7011: FTP Connection Rejected' was added to log FTP and SFTP connection
failures.
A new 'warning 7019: Configured directory is invalid' was added to
log FTP and SFTP directory configuration errors. This warning replaces the
previous 'warning 5006: Inbound Messages Receipt Failure, attempting retry'.
The 'Error 9017: Inbound Monitor Processing failed' replaces the previous 'Error
5007: Inbound Messages Receipt Failure on final retry'.
Issue
3975: See Important Note about Security Updates for this issue above.
Issue
3997: Event text not being logged with inbound monitoring error
event ERR_SYSTEM_IBMONITOR. Changes:
This problem has been fixed.
Issue 4002:
The ssl-poodle vulnerability has created the need to disable SSLv3 as a valid
SSL protocol. Changes: SSLv3 is no longer available in
MessageWay and now only TLS is used. All MessageWay configuration files have
been updated to reflect this change going forward, but existing configuration
files will still work as is because the SSL option will simply be ignored.
Issue 4047:
FTP Adapter location does not work correctly when a leading or trailing space is
used in the URL. Changes: This problem has been fixed.
MessageWay - Issue #3997 (Program changed:
mwmq.exe - version 6.1.0.4)
Issue
3997:
Event text not being logged with inbound monitoring error
event ERR_SYSTEM_IBMONITOR. Changes:
This problem has been fixed.
MessageWay - Issue #3766, 3916, 3926, 3939,
3992, 4073 (Program changed:
mwmsg.exe - version 6.1.0.9)
Issue 3766: Undocumented regression in
hf02 caused an arrival or delivery notification for a file uploaded or
downloaded from a location to report a sender and recipient that are not
consistent with the message properties. Changes: This
problem has been fixed. "Uploaded by: user-id" has been replaced with
"arrived successfully. Uploaded by: user-id". "Downloaded by: user-id" has
been replaced with "was successfully delivered. Downloaded by: user-id".
Issue
3916: Web Client 6.0 does not work with file system hierarchy
added in MWay 6.1. Changes: This problem has been fixed.
Issue
3926: Web Client 6.0 does not behave the same way as MWFTPD
Server when a duplicate file name is uploaded to the file system hierarchy added
in MWay 6.1. Changes: If a second file with the same name
is uploaded to a file system hierarchy location, the first file will be canceled
and the second file will be accepted for upload.
Issue
3939: When large amounts of error information are generated by a
CustomIO or CustomProc location, this error information can slow down MessageWay
to the point that the MWCustomIO Adapter or MWCustomProc Service shuts itself
down. Changes:
This problem has been fixed.
Issue
3992: When attempting to upload a message into the file system
hierarchy (HMS) using FTP Server, and the upload fails, the message is left in a
Receive Error status and is not available to be canceled. Prior to HMS, this was
acceptable behavior, but in HMS, due to filenames can be duplicated, this issue
prevents a message with the same filename from being uploaded.
Changes: The Manager has been changed to allow a message in Receive
Error to be Cancelled and the FTP Server has been changed to recognize this
Receive Error scenario and auto Cancel the message if no restart is attempted.
Issue 4073: Randomly generated
Message ID's such as '20150428141848afails' or '20150428141848errors' should not
be allowed.
Changes: The algorithm used to randomly generate Message ID's has been
modified to replace vowels 'a', 'e', 'i' and 'o' with 'w', 'x', 'y' and 'z'
respectively.
MessageWay - Issue #738, 1785, 2127, 3098,
3347, 3466, 3937, 3938, 3940, 3997, 4004 (Program changed:
mwsched.exe - version 6.1.0.5)
Issue 738: If
a Receipt Schedule is changed after the start time of that schedule, false
notifications will be generated. For example, if a schedule is set for 1pm to
3pm and at 2pm the schedule is changed, the resultant notifications are wrong
for that day. However, for all subsequent days the notifications are correct.
Changes:
This problem has been fixed.
Issue
1785: When using a Monthly Receipt Notification, with a time set
for 11pm-11:59pm, the notification is sent on the previous day at 11:59pm.
The problem happens whether a timezone on the schedule is specified or not.
This appears to be a problem with GMT interpretation. Further research has shown
that any Monthly Receipt Schedules that are configured within the GMT offset of
midnight will generate a notification on the previous day and the contents of
the notification may be wrong. Changes:
This problem has been fixed.
Issue 2127:
A week prior to DST transitions, Receipt Schedule notifications are falsely
being generated because the schedule is ahead an hour. The start and stop time
in the adapter was correct but the email notification was incorrect, though the
file was received on time. The same problem occurred with Location Schedules. If
a timezone was not specifically selected in the schedule (i.e. it defaults to
local time) the Daylight Saving Time (DST) calculation was wrong. Changes:
This problem has been fixed.
Issue 3098:
DST transitions in Location Schedules are not processed correctly because the
InUse field on Timezones is always null. InUse should be set to 'T' whenever a
Location Schedule is modified and the Timezone is non-blank. This is handled
properly for Receipt Schedules. Changes:
This problem has been fixed.
Issue 3347:
After DST transitions, Location Schedules are
running 1 hour earlier than they should be. Changes:
This problem has been fixed. See Important Note about
known issue with Scheduling for this release above.
Issue 3466: When a Receipt Schedule
is setup to use a Holiday Schedule and the time that the Receipt Schedule is
configured to monitor falls on a holiday and the close time is within the GMT
offset of midnight, a false notification will be generated. Changes:
This problem has been fixed.
Issues 3937,
3938:
Receipt Schedule notifications being generated for days not currently configured
in Receipt Schedule. Changes: This problem has been
fixed.
Issue
3940: Daily, weekly or monthly Receipt Schedules that are copied
then edited to create new schedules generate false and incorrect notifications
along with the correct notifications. Changes: This
problem has been fixed.
Issue
3997: Event text not being logged with inbound monitoring error
event ERR_SYSTEM_IBMONITOR. Changes:
This problem has been fixed.
Issue 4004:
Deleting a Location with a Schedule after changing status of Location from
ON_HOLD to RELEASE reports “Access Denied”. Changes: This problem has been fixed.
MessageWay - Issue #3863, 3919, 3950, 3971,
3975, 3997, 4047 (Program changed:
mwsftp.exe - version 6.1.0.7)
Issue
3863:
SFTP Adapter not able to send files greater than 2MB to IBM's Sterling SFTP
Server (Maverick_SSHD). Changes: This problem has been
fixed.
Issues 3919, 3950: Why is an
''Inbound Messages Receipt Failure, attempting retry'' message written to the
system event log when retry is not enabled for a MWFTP or MWSFTP location?
Also why is a 'warn 5006' error written to the system event log instead of a
'fail 5007' error? Changes: The MWFTP and MWSFTP Adapters
have been modified to log appropriate errors when they encounter connection
failures versus directory configuration errors as follows:
A new 'warning
7011: FTP Connection Rejected' was added to log FTP and SFTP connection
failures.
A new 'warning 7019: Configured directory is invalid' was added to
log FTP and SFTP directory configuration errors. This warning replaces the
previous 'warning 5006: Inbound Messages Receipt Failure, attempting retry'.
The 'Error 9017: Inbound Monitor Processing failed' replaces the previous 'Error
5007: Inbound Messages Receipt Failure on final retry'.
Issue
3971: Allow SFTP Adapter to always accept new Server Key with
each new session. Currently SFTP Adapter only allows a new server key to
be accepted once, then it needs to be manually reset to accept the next new key.
Changes: Added checkbox '[x] Always' in the 'SFTP Auth' tab to
always accept a new server key.
Issue 3975: See Important
Note about Security Updates for this issue above.
Issue
3997: Event text not being logged with inbound monitoring error
event ERR_SYSTEM_IBMONITOR. Changes:
This problem has been fixed.
Issue
4047: SFTP Adapter Outbound location does not work correctly if
a trailing '/' is used at the end of the folder path. Also SFTP Adapter
location does not work correctly when a leading or trailing space is used in the
URL. Changes: This problem has been fixed.
MessageWay - Issue #3916, 3922, 3931, 3933,
3946, 3956, 3958, 3959, 3964, 3966, 3969, 3975, 3992, 3994, 3996, 4002, 4010,
4012, 4031, 4032, 4062 (Program changed:
mwsi.exe - version 6.1.0.18)
Issue 3916: Web Client
6.0 does not work with file system hierarchy added in MWay 6.1. Changes:
This problem has been fixed.
Issue
3922: Java errors with AS2 servlets when high message volumes
encountered. Changes: This problem has been fixed.
Issue 3931: Line ending characters not
changing to the native platform values for text mode uploads via Web Client 6.0.
Changes:
This problem has been fixed.
Issue 3933:
Users are not restricted to access MessageWay using “Access Class” via Web
Client 6.0. Changes:
This problem has been fixed.
Issue 3946:
Access Class inheritance from User Security Group to User is sometimes lost.
Changes:
This problem has been fixed.
Issue 3956: Downloading a
message via Web Client 6.0 that has had its 'Contents Deleted On
Complete/Cancel' causes the service interface to abort. Changes:
The download attempt will now fail gracefully with an appropriate error message
written on the ERROR button of Web Client.
Issue 3958: The
AS2 Adapter cores out when a message with missing payload is encountered.
Changes:
This problem has been fixed.
Issue 3959:
When uploading a message via Web Client 6.0, the location name entered in the
Recipient: field must be entered in same case as defined in MessageWay or
message payload is put in wrong place and not able to be viewed, processed or
downloaded. Changes: This problem has been fixed.
Issue
3964: Trailing line ending character being incorrectly removed for text mode uploads via Web Client 6.0
when no line ending conversion is required. Changes:
This problem has been fixed.
Issue 3966:
Web Client 6.0 does not populate Output Name attribute in Manager when a message
is downloaded. Changes: Output Name now gets set to the
remote name specified during the download.
Issue 3969: Web Client 6.0
incorrectly displays 'Password Change Failure' dialog box when in fact the
password was successfully changed in MessageWay. Changes: This problem has been fixed.
Issue
3975: See Important Note about Security Updates for this issue above.
Issue
3992: When attempting to upload a message into the file system
hierarchy (HMS) using FTP Server, and the upload fails, the message is left in a
Receive Error status and is not available to be canceled. Prior to HMS, this was
acceptable behavior, but in HMS, due to filenames can be duplicated, this issue
prevents a message with the same filename from being uploaded.
Changes: The Manager has been changed to allow a message in Receive
Error to be Canceled and the FTP Server has been changed to recognize this
Receive Error scenario and auto Cancel the message if no restart is attempted.
Issue
3994: Memory leaks in service interface and user interface when
performing secure connections into MessageWay. Changes: This problem has been fixed.
Issue 3996:
When a message download from the file system hierarchy is aborted, the message
is left in an inconsistent state. The message does not have a status icon,
it cannot be canceled and an attempt to view its properties
results in 'Access Violation'. Changes: This problem has
been fixed.
Issue
4002: The ssl-poodle vulnerability has created the need
to disable SSLv3 as a valid SSL protocol. Changes: SSLv3
is no longer available in MessageWay and now only TLS is used. All MessageWay
configuration files have been updated to reflect this change going forward, but
existing configuration files will still work as is because the SSL option will
simply be ignored.
Issue
4010: Regression in the way that SFTP Server handles
Private/Public key authentication when a users password has expired.
Changes: An expired user password will not prevent a
Private/Public key authenticated user from successfully logging into MessageWay
using the SFTP Server.
Issue
4012: Add DenyUsers functionality to SFTP Server to help prevent
'brute force attacks' from using up valuable system resources in the service
interface. Changes: New parameter DenyUsers can now
be configured in mwsftpd_config file to specify list of users that should not be
allowed thru to the service interface via SFTP Server.
Issue
4031: “Delete on Complete” fails to remove payload from msgstore
when a message in the file system hierarchy is renamed or moved via a perimeter
server or script. Changes: This problem has been fixed.
Issue
4032: The service interface logs an incorrect audit action of
'Release' when a message is redirected. Changes: The
audit action logged has been changed from 'Release' to 'Redirect'.
Issue
4062: FTP command "SIZE filename" returns a size 0 in ASCII mode
when a message is not the original message but a related message. Changes: This problem has been fixed.
MessageWay - Issue #4059 (Program changed:
mwtranslator.exe - version 6.1.0.5)
Issue 4059:
Memory leak in the translator runtime module.
Changes:
This problem has been fixed.
MessageWay - Issue #3098, 3347, 3918, 3946,
3971, 3975, 3983, 3994, 4002 (Program changed:
mwuser.exe - version 6.1.0.16)
Issue
3098: DST transitions in Location Schedules are not
processed correctly because the InUse field on Timezones is always null. InUse
should be set to 'T' whenever a Location Schedule is modified and the Timezone
is non-blank. This is handled properly for Receipt Schedules. Changes:
This problem has been fixed.
Issue
3347:
After DST transitions, Location Schedules are running
1 hour earlier than they should be. Changes:
This problem has been fixed.
Issue
3918: Provide a configurable option to disable the F6 function
key (displays SQL statements) in the MessageWay Manager. Changes:
New parameter DisableF6 has been added to mwuser.conf. Valid values are
true or false, with false being the default.
Issue
3946: Access Class inheritance from User Security Group to User
is sometimes lost. Changes:
This problem has been fixed.
Issue
3971: Allow SFTP Adapter to always accept new Server Key with
each new session. Currently SFTP Adapter only allows a new server key to
be accepted once, then it needs to be manually reset to accept the next new key.
Changes: Added checkbox '[x] Always' in the 'SFTP Auth' tab to
always accept a new server key.
Issue
3975: See Important Note about Security Updates for this issue above.
Issue
3983: Performing a ‘Find Messages’ search for messages based on
‘size’ and choosing a size over 2.5 GB (2500000000) fails and displays a
negative value for size and percent in the ‘Message Query Details’.
Changes: This problem has been fixed.
Issue
3994: Memory leaks in service interface and user interface when
performing secure connections into MessageWay. Changes: This problem has been fixed.
Issue
4002: The ssl-poodle
vulnerability has created the need to disable SSLv3 as a valid SSL protocol.
Changes: SSLv3 is no longer available in MessageWay and now
only TLS is used. All MessageWay configuration files have been updated to
reflect this change going forward, but existing configuration files will still
work as is because the SSL option will simply be ignored.
MessageWay - Issue #3975
(Program changed:
libeay32.dll)
Issue
3975:
See Important Note about Security Updates for this issue above.
MessageWay - Issue #3975
(Program changed:
ssleay32.dll)
Issue
3975:
See Important Note about Security Updates for this issue above.
MessageWay - Issue #3950
(Program changed:MWayMessages.dll)
Issues
3950: Why is an
''Inbound Messages Receipt Failure, attempting retry'' message written to the
system event log when retry is not enabled for a MWFTP or MWSFTP location?
Also why is a 'warn 5006' error written to the system event log instead of a
'fail 5007' error? Changes: The MWFTP and MWSFTP Adapters
have been modified to log appropriate errors when they encounter connection
failures versus directory configuration errors as follows:
A new 'warning
7011: FTP Connection Rejected' was added to log FTP and SFTP connection
failures.
A new 'warning 7019: Configured directory is invalid' was added to
log FTP and SFTP directory configuration errors. This warning replaces the
previous 'warning 5006: Inbound Messages Receipt Failure, attempting retry'.
The 'Error 9017: Inbound Monitor Processing failed' replaces the previous 'Error
5007: Inbound Messages Receipt Failure on final retry'.
MessageWay - Issue #3863
(Program changed:
ssh.dll)
Issue
3863:
SFTP Adapter not able to send files greater than 2MB to IBM's Sterling SFTP
Server (Maverick_SSHD). Changes: This problem has been
fixed.
MessageWay - Issue #3941
(Program changed:
trm.dll)
Issue
3941:
Translator Service aborting while translating X12 835 to Proprietary standard.
Changes: This problem has been fixed.
MessageWay - Issue #3922, 4044, 4074 (Program changed:
MessageWay Installation Guide)
Issue
3922: Update documentation to
reflect that Ipswitch has verified our AS2 package running with
apache-tomcat-7.0.56.
Changes: This problem has been fixed.
Issue
4044: Update copyright to 2015
in documentation. Also remove all references to SSLv3 from documentation.
Changes: This problem has been fixed.
Issue
4074: Update documentation to
reflect that Ipswitch has verified MessageWay will run on Windows Server 2012 R2
with Windows SQL Server 2012.
Changes: MessageWay now supports Windows Server 2012 R2
Standard 64 Bit along with Windows SQL Server 2012 Enterprise Edition sp2, 64 Bit
database using the 32 Bit DSN.
MessageWay - Issue #3496
(Program changed:
MessageWay Service Interface API)
Issue
3496: This document incorrectly
states that a C++ API is supported.
Changes: This problem has been fixed.
MessageWay - Issue #3922, 3928, 3971, 3974,
3991, 4044, 4074
(Program changed: MessageWay Users Guide and Reference)
Issue
3922: Update documentation to
reflect that Ipswitch has verified our AS2 package running with
apache-tomcat-7.0.56.
Changes: This problem has been fixed.
Issue
3928:
The table of actions that can be selected for a Trigger Schedule incorrectly
states that the Execute Now and Input Now actions override closed schedules and
locations on hold. Changes: This problem has been fixed.
Issue
3971: Allow SFTP Adapter to always accept new Server Key with
each new session. Currently SFTP Adapter only allows a new server key to
be accepted once, then it needs to be manually reset to accept the next new key.
Changes: Added checkbox '[x] Always' in the 'SFTP Auth' tab to
always accept a new server key.
Issue
3974: Update documentation to
reflect that the SFTP Server is now based on OpenSSH_6.6.
Changes: This problem has been fixed.
Issue
3991:
Regarding EventLog record retention, update "What's This" help and "MessageWay
Users Guide and Reference" to state that the Audit File retention settings also
control the EventLog record retention settings.
Changes: This problem has been fixed.
Issue
4044: Update copyright to 2015
in documentation. Also remove all references to SSLv3 from documentation.
Changes: This problem has been fixed.
Issue
4074: Update documentation to
reflect that Ipswitch has verified MessageWay will run on Windows Server 2012 R2
with Windows SQL Server 2012.
Changes: MessageWay now supports Windows Server 2012 R2
Standard 64 Bit along with Windows SQL Server 2012 Enterprise Edition sp2, 64 Bit
database using the 32 Bit DSN.
(October 24, 2013) Changes from
messageway-6.1.0-hf02
rolled into current Maintenance Release
MessageWay - Issue #1723 (Program changed:
mwmq.exe - version 6.1.0.2)
Issue 1723: Enhance the MessageWay WebSphere MQ Adapter to provide context
information for output locations. Changes: Added new context
fields to the MQ Output tab: Application Identity Data, Application Origin,
Application Name, Accounting Token and User Id. The Application Type attribute is set to
Unix or Windows automatically depending on the platform where the MWMQ adapter
is running. Also added an End of Line field so users can choose the EOL
character depending on their needs: Unchanged, CRLF (Windows) or NL (UNIX).
MessageWay - Issue #3761 (Program changed:
mwsi.exe - version 6.1.0.7)
Issue 3761: In previous versions of MessageWay, an upload by a remote client
results in a message where the remote client's default location provides the
message sender. In version 6.1, this changed: the remote client's user ID
provides the message sender. Changes: To provide the default
functionality of previous versions of MessageWay, the sender/source of an
uploaded message has been reverted to the sender's default location. To allow
users to change the sender of uploaded messages, a new parameter has been added
to the Listener Configurations section in the configuration file mwsi.conf.
Users can set the parameter SenderIsUser=True to change the sender of an
uploaded file to the name of the sender instead of the sender's default
location. Please refer to the new parameter in the sample configuration file
mwsi.conf.samp. Copy and paste the description from the comments section
and the parameter into your configuration file, and set the parameter to suit
your needs. Don't forget to restart your SI
server to make any changes to your configuration file take effect.
MessageWay - Issue #3522, 3766, 3838 (Program changed:
mwmsg.exe - version 6.1.0.5)
Issue 3522: A message alias is created when a remote
client downloads a file from the File System. This alias records the successful
download while the original message remains in the Available state. The alias is
always created with Input_Message_ID set to the same value as its Message_ID. In
most cases, this ensures that Get Related Messages for the Available message and
for the downloaded message are successful and list all relevant messages. But if
an operator redirected some unrelated Complete message to the File System
mailbox and that message was downloaded by the remote client, Get Related
Messages for the Available message did not list the downloaded message and Get
Related Messages for the downloaded message resulted in an exception. Changes:
This problem has been fixed.
Issue 3766: A delivery notification for a file
downloaded from a traditional or file system mailbox reported sender and
recipient that were not consistent with the message properties. Changes:
This problem has been fixed. In addition, the notification reports the user who
downloads the message.
Issue 3838: The Delete on Complete option did not
apply to messages marked Canceled, which meant that messages addressed to a file
system mailbox were never eligible for delete on complete. Changes:
The Delete on Complete option was enhanced to apply to Canceled messages as
well.
MessageWay - Issue #3097, 3820, 3873, 3882 (Program changed:
mwuser.exe - version 6.1.0.13)
Issue 3097: With an Oracle database, MessageWay Manager displayed file sizes
greater than 2GB as negative numbers. This does not
occur with MySQL databases. Changes: This problem has been
fixed.
Issue 3820: In MessageWay Manager, system monitor
counts did not include messages in the Schedule Wait state. Changes:
This problem has been fixed.
Issue 3873: In MessageWay Manager, invalid rights
were applied when moving or copying an object from one folder to another. For
example, when copying a folder to another path that had inherit permissions
enabled, the newly copied folder retained its original rights, including those
inherited from parent folders, and had the new
rights applied as well. Changes: Behavior is different
depending on whether you do a copy and paste or a cut and paste/move. When
you copy and paste an existing object (location, rules profile or key),
MessageWay will remove all access rights that have been inherited from the
objects current parent folder and update all inherited access rights from the
objects new parent folder. When you cut and paste/move an existing object
(folder, location, rules profile or key), MessageWay will retain all access
rights that have been inherited from the objects current parent folder. To
update the inherited access rights to those of the objects new parent folder,
for each user and group on the list, you must first clear the Inherit new
users/groups box and then recheck the box. After moving a folder, the access
rights must be correctly updated for the folder itself and for all of its
offspring (sub-folders, locations, rules profiles and keys).
Issue 3882: With an Oracle database, use of the
various Find options in MessageWay Manager could result in a permanent increase
of one open cursor for each session (Logon, queries, Logoff), no matter how many
queries were initiated. Changes:
This problem has been fixed.
MessageWay - Issue #3809 (Program changed:
mwcustomio.exe - version 6.1.0.2)
Issue 3809: MWCustomIO Input did not produce a
Receive Error message for non-zero exit codes nor when a Status file was used
(with a zero exit code). Changes: This problem has been fixed.
MessageWay - Issue #3848, 3869 (Program changed: mwimp.exe -
version 6.1.0.3)
Issue 3848, 3869: Import utility did not enforce
encrypted storage of passwords in the application database for users or
locations. This also caused an error where the UNZIP compression service
occasionally incorrectly reported that the supplied password was invalid. Changes:
This problem has been fixed.
MessageWay - Issue #3868 (Program changed:
mwexp.exe - version 6.1.0.2)
Issue 3868: Export utility did not export empty
location folders, that is folders that contained no locations. Changes:
The export utility has been enhanced and now exports all location folders,
whether they contain locations or not.
MessageWay - Issue #2806, 3870 (Program changed:
mwsftp.exe - version 6.1.0.4)
Issue 2806: MWSFTP adapter
could not send or receive files greater than 64GB. Changes: This
problem has been fixed.
Issue 3870: Users could not set file
permissions on files transferred with the SFTP adapter. The files were always
created with a default value of 640. Changes: Enhanced the
mwsftp adapter to allow users to set the file permissions in a Create Mode field
on MWSFTP Adapter or location properties, similar to what users can do on
UNIX/Linux systems with the Disk adapter.
MessageWay - Issue #3874 (Program changed:
mwcompress.exe - version 6.1.0.2)
Issue 3874: When the MW compression service
processed a valid zip archive that has
no file(s) in the archive, it
marked the message as complete, even though the
process did not produce output. Changes: This problem has been
fixed. When the compression service uncompresses an empty archive, it sets the
properties of the message to an Error state and a Reject processing status. The
Error detail tab reads "Processing Failure, manual retry: Empty ZIP Archive."
MessageWay - Issue #3861 (Program changed:
mwres - version 6.1.0.3)
Issue 3861: The MessageWay
RES client did not correctly process the configuration file setting for timeout
or the command line setting (-t). Changes: This problem with
the RES client has been fixed.
MessageWay Translator Service - Issues #3313,
#3912
(Files changed: trm.dll - version 6.1.0.2, trmxml.dll,
xerces-c_2_8.dll)
Issue 3313: The MessageWay
Translator Service did not correctly process translations that used the X12
006020 standard. Changes: This problem has been fixed.
Issue 3912: The MWTranslator Service did not correctly process translations that used
the XML user exit on Windows systems, which prevented the translator from
processing XML files. Changes: This problem has been fixed.
(May 31, 2011) Changes from
messageway-6.1.0-hf01
rolled into
current Maintenance Release
The general purpose of this Hotfix is to support MessageWay Web Client. Please
also refer to the document "MessageWay Web Client Release Notes."
MessageWay - Issue #3535 (Program changed:
mwsi.exe - version 6.1.0.6)
Issue 3535:
There was an error condition in how the MWSI server handled messages of a very
specific size, causing the message to be rejected, leaving a message in receive
error with a length of zero. This message size could vary and depended on
the chunk size the client process was using to structure the http encoded
messages sent to MWSI. Changes: This problem has been fixed.
| |
