Device Info Report - VRRP 2 information
The Virtual Router Redundancy Protocol (VRRP) information on the device is displayed on this page. The information relates to the standby nature of routers.
- . Displays the interface used in the virtual routing configuration.
- . Displays the priority to be used for the virtual router master election process. A higher value implies a higher priority.
- . Displays the authentication type used for VRRP protocol exchanges between virtual routers.
- . Displays the time interval in seconds between sending advertisement messages. Only the master router sends VRRP advertisements.
- . Displays the preempt mode. This mode controls whether a higher priority virtual router will preempt a lower priority master.
- . Displays the up time, measured since the virtual router transitioned out of the initialized state.
- . Displays the particular protocol that is controlled by the VRRP; either 1 - ip, 2 - bridge, 3 - decnet, or 4 - other.