Using Device Properties - General

The General section of the Device Properties dialog box provides, and lets you modify, basic information for the selected device.

• Display name. An identifying name for the current device. This name is populated during discovery, but can be changed by the user at any time. Changing the name will not change how the device is polled, only how it is displayed in WhatsUp Gold.
• Polling type. Select the type of polling you want  WhatsUp Gold to use for this device.
  • ICMP (TCP/UDP)
  • IPX
  • NetBIOS

  Note: If NetBIOS is selected, the Host Name box must contain a valid NetBIOS name. If IPX is selected, the Address box must contain a valid IPX address. If NetBIOS or IPX is selected, you cannot monitor TCP/IP services on this device.

• Poll using. Select if you want WhatsUp Gold to use the IP address or the Host name (DNS) of the device for polling.
• Host name (DNS name). This should be the official network name of the device if the polling method is ICMP. The network name must be a name that can be resolved to an IP address. If the polling method is NetBIOS or IPX, this must be the NetBIOS or IPX name.
• Address. Enter an IP or IPX address.
• Additional Network Interfaces. Click to configure an additional Network Interface for the current device.
• Device. Select the appropriate device type from the pull-down menu. The icon displayed will represent the device in all views.

See Also Using Device Properties Working with Device Properties Using Device Properties - Summary Device Properties - Performance Monitors Using Device Properties - Active Monitors Using Device Properties - Passive Monitors Using Device Properties - Actions Using Device Properties - Credentials Using Device Properties - Polling Using Device Properties - Virtualization Using Device Properties - Notes Using Device Properties - Custom Links Using Device Properties - Attributes Using Device Property - Menu Using WhatsConfigured Device Properties - Tasks Using Device Properties - Wireless