To set the VoIP MOS threshold options
To set the VoIP MOS threshold options:
- From the Active Monitor Library, select the VoIP monitor for which you want to set VoIP threshold option, and then click . The VoIP Settings dialog appears.
- Use the slider bar to adjust the threshold.
- Select one of the options to identify the:
- . Select this option to include all of device RTT entries to check MOS performance thresholds. For example, if the following tags are used to define the source and destination devices:
- SLA 1 (Atlanta to Augusta Sat Office)
- SLA 200 (Atlanta to Lexington)
- SLA 300 (Atlanta to Florida Sat Office)
then all entries will be monitored for the acceptable MOS threshold compliance.
- . You can limit device RTT entries that use this MOS performance threshold. Type all, or a portion, of the tag used to identify the source and destination devices. For example, if the following tags are used to define the source and destination devices:
- SLA 1 (Atlanta to Augusta Sat Office)
- SLA 200 (Atlanta to Lexington)
- SLA 300 (Atlanta to Florida Sat Office)
then if you include Sat Office
in this box, only the source/destination devices with Sat Office
as part of the tag entry are monitored for the acceptable MOS threshold compliance.
- Click to change the following options:
- . Enter the amount of time (in seconds) you want the system to wait before failing the connection to the device.
- . Enter the number of times you want the computer to attempt to make the connection to the selected device before failing.
- Click .