Deleting flow sources

When you no longer want to gather flow data from a source, it can be deleted. When you delete a flow source, both the configuration information and all flow data associated with the source is deleted. The following procedure describes how to delete a flow source.

To delete a flow source:

1. Navigate to the Flow Sources list dialog.
   1. From the WhatsUp Gold web interface, select GO. The GO menu appears.
   2. Click the Flow Monitor icon. The Flow Monitor Menu appears.
   3. On the Flow Monitor menu select Configure > Sources. The Flow Sources list appears.
2. Disable the source.
   1. On the Flow Sources list, select the source you want to delete.
   2. Click Edit. The Flow Source edit dialog appears.
   3. Clear Enable flow data collection from this source option.
   4. Click OK. The Flow Sources list appears.
3. Delete the source.
   1. Verify that the source you wish to delete is not enabled. The word No appears in the Enabled column when the source is not enabled.
   2. Click Delete. A delete verification dialog appears.
   3. Click Yes to verify that you want to delete the source. The Flow Sources list dialog appears with the source deleted.

See Also Flow Monitor Sources Determining which device sources to monitor Configuring Flow sources Configuring Cisco NetFlow Device Configuration Creating flow sources About Flexible NetFlow About Network Based Application Recognition (NBAR) About CBQoS