Top Applications
This workspace report displays the applications used by devices generating the most traffic traveling in the selected direction (Inbound, Outbound, Inbound and Outbound, or Bounce) on the selected interface. Application definitions are created using the Map Ports to Applications dialog ( or) which maps port numbers to applications.
Application data is useful in determining the types of tasks persons on the network are conducting the most over the selected time period.
- . Displays the application used by the devices generating the highest traffic on the selected interface.
: Traffic that flows between unmonitored ports is considered unclassified. In Flow Monitor, for traffic to be considered "unclassified," both the port from which the data is sent, and the receiving port must not be mapped to an application in the Configure Application dialog. If either the sending or receiving port is mapped to an application, the traffic is associated with the application.
If Flow Monitor detects a large amount of traffic to an unmonitored port, this workspace report displays a yellow warning flag that explains the situation and guides you in defining the unmonitored port. This can help you to proactively detect emerging non-standard traffic on your network. You can also use the Unclassified Traffic dialog (available from any page in Flow Monitor by selecting) to view all unclassified traffic since the last hourly rollup.
- . Displays the bytes per second for the report category.
- . Displays the percentage of the total available bandwidth used by the report category.
: Usage is displayed as N/A if a speed is not specified for the interface. You can set this speed on the Flow Interface dialog. To navigate to the Flow Interface dialog, right-click on the interface on which you want to set the speed, then click .
. Displays the percentage ranking of the item within the top "n" items of the report category.
For more information
About interface traffic directions
: For illustration purposes, the descriptions and diagrams in the table below assume that traffic is passing from an internal interface to an external interface or vice versa. In reality, traffic may pass from an internal interface to another internal interface, an external interface to another external interface, or traffic may be routed out the same interface it enters.
Interface
|
Traffic Direction
|
Report displays...
|
Internal interface
|
Inbound
|
The top applications used by devices on the LAN segment connected to the selected internal interface to communicate with outside devices.
|
Outbound
|
The top applications used by outside devices to communicate with devices on the LAN segment connected to the selected internal interface.
|
Inbound/ Outbound
|
The top applications used by all devices transmitting traffic across the selected internal interface.
|
External interface
|
Inbound
|
The top applications used by devices connected to the selected external interface to communicate with devices on an internal LAN segment.
|
Outbound
|
The top applications used by devices on internal LAN segments to communicate with devices connected to the selected external interface.
|
Inbound/ Outbound
|
The top applications used by all devices transmitting traffic across the selected external interface.
|
Configuring this workspace report in Flow Monitor
To configure this workspace report in Flow Monitor:
- In the title bar of the workspace report pane, click the configure icon . The Configure Flow Report dialog appears.
- Enter or select the appropriate information in the following fields.
- . Enter a title for the workspace report. This name appears in the title bar of the workspace report's pane.
- . Enter the number of records you would like displayed in the workspace report.
- . Select the type of data you would like displayed within the workspace report (Chart and data, Data only, Chart only).
- . Select the type of chart you would like the report to display.
- . Specify how wide, in pixels, the graph or chart should appear.
- . Specify how tall, in pixels, the graph or chart should appear.
- . Select the transfer speed format for which you want to view data. Choose Auto scale, bps, Kbps, Mbps, or Gbps.
- . Enter a minimum value for the graph.
- . Enter a maximum value for the graph.
- Click to save changes.
Exporting data from this workspace report
You can export the data displayed in this workspace report by clicking the Export button on the workspace report menu. For more information, see Exporting report data.
About workspace reports and filters
Workspace reports only show the data matching the filters applied to the full report. If no filters are applied, all data for the selected time period are shown. For more information on filtering, see Filtering data in a view.