Network Statistics Monitor

How to get here

Use this dialog to configure the Network Statistics Active Monitor. This monitor uses Simple Network Management Protocol (SNMP) to query a device to collect data on three device protocols, Internet Protocol (IP), Transmission Control Protocol (TCP), and User Datagram Protocol (UDP), and alerts you when the thresholds you specify are met or exceeded. For example, you can use the IP received discarded threshold monitor to watch for situations where a router with Quality of Service (QOS) has priorities set for Voice over IP (VoIP).

For more information, see Example - Using a Network Statistic Monitor to check for IP data received and discarded.

Note: This feature is only available in WhatsUp Gold Premium Edition. To update your license, visit the MyIpswitch portal.

Enter or select the appropriate information in the following fields.

• Name. Enter a name for the monitor. This name is displayed in the Active Monitor Library.
• Description. Enter a short description for the monitor. This description is displayed next to the monitor name in the Active Monitor Library.
• Thresholds to monitor. Select the IP, TCP, and/or UDP thresholds you want to monitor.

Tip: To configure individual settings, select a threshold, then click Configure.

Note: You can only configure one threshold at a time.

• Object ID. The OID of the most recently selected parameter.
• Description. The description of the most recently selected parameter.

Click OK to save changes.