Using IP/MAC Finder

The IP/MAC Finder tool provides an easy way to locate an IP or MAC address on the network. Using the previously discovered network devices, IP/MAC Finder will find and display network interfaces that have sighting information for the supplied IP or MAC address. To get the most up-to-date sighting information, you can use the Refresh button which sends SNMP requests to each network device to quickly update the sighting information.

When enough network data is available, IP/MAC Finder indicates to which network interface the IP or MAC address is physically connected.

Note: The IP/MAC Finder is accessible from both the WhatsConnected console and the WhatsUp Gold console.

The IP/MAC Finder tool can search for either an IP or a MAC address on the network. The results of the search are displayed in the IP/MAC Finder list columns.

To use the IP/MAC Finder tool on the WhatsConnected console:

From WhatsConnected:

1. From the main menu of the WhatsConnected console, select Tools > IP/MAC Finder. The IP/MAC Finder dialog appears.

   Tip: You can also view IP/MAC finder tool from the WhatsConnected console shortcut menu. Click (IP/MAC Finder shortcut icon). The IP/MAC Finder dialog appears.

From WhatsUp Gold:

1. From the WhatsUp Gold console, select a device group map view.
2. Right-click on any device in the map view. The right-click menu appears.
3. Click IP/MAC Finder. The WhatsConnected - IP/MAC Finder dialog appears.

4. Enter the appropriate information in the following fields.
   • IP Address. Enter the IP address of a device for which you want to find sightings on the network. Leave this option blank if you are only scanning for a MAC address.
     - or -
     Click Select to select a device, in the Select Devices dialog, for which you want to identify a MAC address. For more information, see About the Select button.

     Note: The IP/MAC Finder tool does not support IPv6 addresses.

   • MAC Address. Enter The MAC address for which you are scanning the network. Leave this option blank if you are only scanning for an IP address.
5. Select Use Network Devices Only to display the IP/MAC sightings found only on network device types.
   - or -
   Deselect Use Network Devices Only to display all IP/MAC sightings found on all device types.
6. Click Find to search the network to locate where the IP or MAC device is on the network. The results of the search are displayed in the Sighting Information list:
   • Device. Lists the name of the network device that has sighting information for the IP or MAC address.
   • IP Address. Lists the IP address of the sighting device.
   • Interface Name. Lists the network interface that is routing or forwarding traffic to the IP or MAC address.
   • Is Linked To. Lists the network devices to which the device is linked.
7. Click Clear to remove the information from the IP/MAC Finder table and start a new device sighting.
   - or -
   Click Close to close the dialog.

To use the IP/MAC Finder tool within WhatsUp console:

1. From the WhatsUp Gold console, right-click a source device in a Device View or Map View tab. The right-click menu appears.
2. Click IP/MAC Finder. The IP/MAC Finder dialog appears.
3. Enter the appropriate information in the following fields.
   • IP Address. Enter the IP address of a device for which you want to find sightings on the network. Leave this option blank if you are only scanning for a MAC address.
     - or -
     Click Select to select a device, in the Select Devices dialog, for which you want to identify a MAC address. For more information, see About the Select button.

     Note: The IP/MAC Finder tool does not support IPv6 addresses.

   • MAC Address. Enter The MAC address for which you are scanning the network. Leave this option blank if you are only scanning for an IP address.
4. Select Use Network Devices Only to display the IP/MAC sightings found only on network device types.
   - or -
   Deselect Use Network Devices Only to display all IP/MAC sightings found on all device types.
5. Click Find to search the network to locate where the IP or MAC device is on the network. The results of the search are displayed in the Sighting Information list:
   • Device. Lists the name of the network device that has sighting information for the IP or MAC address.
   • IP Address. Lists the IP address of the sighting device.
   • Interface Name. Lists the network interface that is routing or forwarding traffic to the IP or MAC address.
   • Is Linked To. Lists the network devices to which the device is linked.
6. Click Clear to remove the information from the IP/MAC Finder table and start a new device sighting.
   - or -
   Click Close to close the dialog.