Failed Connections

From the WhatsUp Gold navigation menu:

1. Select the Settings tab, select Alerts and Actions and choose Alert Center.

   Alert Center Libraries view displays.

2. Click the Failed Connections panel (if collapsed).

   The Failed Connections displays.

3. On the Failed Connections panel, click "add" ().

   The Select Failed Connections Type dialog displays.

4. Choose Failed Connections and click OK.

   The Configure Threshold Alert dialog displays.

5. Edit the Failed Connections configuration.

To configure a Network Traffic Analysis failed connections threshold:

1. Configure the following:
   • Name. Specify a name for the threshold. This name helps you identify the threshold in the Threshold library and displays as the report title on the Alert Center Home page.
   • Threshold. Select and enter the desired threshold criteria variables and values. The default threshold is exceeded when a host has sent or received more than 1000 failed connections in the past 15 minutes.

   Note: Network Performance Monitor can only find failed connections on sources that are not sending sampled data.

   • Traffic to monitor. Select the Network Traffic Analysis source or interface from which to monitor traffic.
     When you select a source, traffic for all interfaces on the source is monitored. When you select an interface, only traffic for the selected interface is monitored.
     By default, the threshold is set to monitor traffic from all Network Traffic Analysis sources.

   Note: Sources sending sampled data are not displayed as a selection option in the Traffic to monitor list because Network Traffic Analysis cannot determine that traffic has failed on sampled data.

   • Hosts to monitor. Click Select to choose the hosts to which the threshold applies. By default, the threshold monitors all applicable hosts.
   • Notification. Select the notification policy to apply to this threshold. This policy begins sending notifications when an item is outside the configured threshold limits. If you do not see an appropriate threshold policy, or if the list is empty, click browse (...) to open the Notification Policy dialog and configure a new policy.

   Tip: Notification policies are optional for most thresholds. Out of threshold items still appear on the Alert Center dashboard.

   • Threshold check. Enter a value for the threshold check interval, or the interval at which the Alert Center checks the Network Performance Monitor database to see if there are items that are outside the threshold parameters.
   • Select Automatically resolve items no longer out of threshold to have Alert Center automatically resolve items when they go back inside the parameters of the threshold.

   Note: Configure the threshold check interval for a longer time than the sampling interval for thresholds relating to trends, such as percent utilization. Configure it for a time the same as (or similar to) the sampling interval when configuring a threshold for a health check.
   Avoid setting the threshold check interval to a very short time, as this can degrade system performance. In general, setting the threshold check interval to less than five minutes is not advised.

2. Click OK to save the threshold.

Clone a threshold based on a custom or built-in configuration:

1. Click on a threshold on the Thresholds Library panel you want to copy.
2. Click the Copy button, and click OK to create a new Failed Connections.

   The Edit Failed Connections dialog displays.

3. Save or customize your new threshold, either:
   • Type in a new value for Name field (or keep the default) and click OK to save to the Thresholds Library.
   • Follow the Edit Failed Connections instructions.

Delete an existing Failed Connections:

1. Select Failed Connections you want to delete from the Failed Connections panel.
2. Click the Delete button, and then click Yes to confirm the deletion.

   The Failed Connections configuration is deleted.