From the WhatsUp Gold navigation menu:

1. Select the Settings tab, select Alerts and Actions and choose Alert Center.

   Alert Center Libraries view displays.

2. Click the Network Traffic Analysis Custom Threshold panel (if collapsed).

   The Network Traffic Analysis Custom Threshold displays.

3. On the Network Traffic Analysis Custom Threshold panel, click "add" ().

   The Select Network Traffic Analysis Custom Threshold Type dialog displays.

4. Choose Network Traffic Analysis Custom Threshold and click OK.

   The Configure Threshold Alert dialog displays.

5. Edit the Network Traffic Analysis Custom Threshold configuration.

Track device characteristics with a set of rules, limits, and thresholding factors that you define.

Configure a Network Traffic Analysis custom threshold:

• Name. Used in the Threshold library and the quick select title on the Alert Center Dashboard.
• Notification Policy. Select the notification policy to apply to this threshold. The policy initiates notifications when an item is outside the configured threshold limits.
• Threshold Check Interval. Enter a time interval for Alert Center to check the Network Performance Monitor database for items that are out of the threshold limits.

  Automatically resolve items no longer out of threshold. Select this option if you want Alert Center to automatically resolve items when they return to the value within the threshold limit.

Tip: Notification policies are optional for most thresholds. Out of threshold items still appear on the Alert Center dashboard.

Add Condition Rules (chain together filters)

An example threshold involving multiple filters could state, "This threshold will alert when any host with Protocol matching TCP and Application matching pop3 sent or received more than 100 MB of data in the past 15 minutes."

Select Filters from Drop Down Lists to Chain Together Custom Filter Conditions

Select Traffic Direction(s)

• a host has... Select the direction(s) of traffic to consider.
• more than... Select a traffic volume boundary.
• in the past... Select a period for the measurement.

Select Applied Hosts

Note: Sources sending sampled data are not displayed as a selection option in the Traffic to monitor list because Network Traffic Analysis cannot determine that traffic has failed on sampled data.

• Traffic to monitor. By default, the threshold is set to monitor traffic from all Network Traffic Analysis Sources. Select the Network Traffic Analysis source or interface from which to monitor traffic. When you select a source, traffic for all interfaces on the source is monitored. When you select an interface, only traffic for the selected interface is monitored.

  Tip: When you select a source, traffic for all interfaces on the source is monitored. When you select an interface, only traffic for the selected interface is monitored.

• Hosts to monitor. By default, the threshold monitors all applicable hosts. You can also select IP ranges and IP Groups.
  • All Hosts. By default, the threshold monitors all applicable hosts

    Exclude Hosts. Select to ignore the traffic for a list of hosts you assemble here.

  • Specific Hosts. Click Apply this Threshold to Specific Hosts to choose the hosts to which the threshold applies.

    

Note: Configure the threshold check interval for a longer time than the sampling interval for thresholds relating to trends, such as percent utilization. Configure it for a time the same as (or similar to) the sampling interval when configuring a threshold for a health check.

Tip: Avoid setting the threshold check interval to a very short time. Aggressive intervals can degrade system performance. In general, setting the threshold check interval to less than five minutes is not advised.

Clone a threshold based on a custom or built-in configuration:

1. Click on a threshold on the Thresholds Library panel you want to copy.
2. Click the Copy button, and click OK to create a new Network Traffic Analysis Custom Threshold.

   The Edit Network Traffic Analysis Custom Threshold dialog displays.

3. Save or customize your new threshold, either:
   • Type in a new value for Name field (or keep the default) and click OK to save to the Thresholds Library.
   • Follow the Edit Network Traffic Analysis Custom Threshold instructions.

Delete an existing Network Traffic Analysis Custom Threshold:

1. Select Network Traffic Analysis Custom Threshold you want to delete from the Network Traffic Analysis Custom Threshold panel.
2. Click the Delete button, and then click Yes to confirm the deletion.

   The Network Traffic Analysis Custom Threshold configuration is deleted.