Configuring a Wireless Client Bandwidth Threshold

This threshold will alert when clients that are connected to the specified SSID(s) exceed their bandwidth quota for the specified traffic direction, in the given time range.

Configure a Wireless Client Bandwidth threshold:

Name. Used in the Threshold library and the title on the Alert Center Dashboard.
Notification Policy. (Optional) Select the notification policy to apply to this threshold. The policy initiates notifications when an item is outside the configured threshold limits.
Threshold Check Interval. Enter a time interval for Alert Center to check the Network Performance Monitor database for items that are out of the threshold limits.
Automatically resolve items no longer out of threshold. Select this option if you want Alert Center to automatically resolve items when they return to the value within the threshold limit.

Note: Notification policies are optional for most thresholds. If you do not select a notification policy, no notifications are generated for the threshold, but a dashboard report listing the out of threshold items still appears on the Alert Center Home page.

Add Condition Rules:

Traffic Direction. Select to calculate bandwidth as measured to the client, or originating from the client, or both.
Client Bandwidth (average).
Duration. Specify a time range or "rolling interval" for calculating an average to compare to Client Bandwidth threshold.
SSIDs. Restrict the set of clients to be used in the calculation to clients access points connected to while using these SSIDs.
Excluded MAC Addresses. Exclude clients based on their wireless Ethernet MAC addresses.

Select Applied Devices

Apply to All Devices. By default, the threshold monitors all applicable hosts.
Exclude Devices. Select to build or apply an exclusion list.
Click Apply this Threshold to Specific Devices to choose the hosts to which the threshold applies.
Note: Configure the threshold check interval for a longer time than the sampling interval for thresholds relating to trends, such as percent utilization. Configure it for a time the same as (or similar to) the sampling interval when configuring a threshold for a health check.

Tip: Avoid setting the threshold check interval to a very short time. Aggressive intervals can degrade system performance. In general, setting the threshold check interval to less than five minutes is not advised.