Track incidents that occur which are normally ignored due to blackout policy rules.

Alerts when a blackout period has ended and an action would have been triggered by a passive monitor or state change

Configure a Blackout Summary threshold:

• Name. Used in the Threshold library and the title on the Alert Center Dashboard.
• Notification Policy. (Optional) Select the notification policy to apply to this threshold. The policy initiates notifications when an item is outside the configured threshold limits.
• Threshold Check Interval. Enter a time interval for Alert Center to check the Network Performance Monitor database for items that are out of the threshold limits.

  Automatically resolve items no longer out of threshold. Select this option if you want Alert Center to automatically resolve items when they return to the value within the threshold limit.

Note: Notification policies are optional for most thresholds. If you do not select a notification policy, no notifications are generated for the threshold, but a dashboard report listing the out of threshold items still appears on the Alert Center Home page.

Note: You cannot configure threshold criteria for the Blackout Summary threshold.

Select Applied Devices

• Apply to All Devices. By default, the threshold monitors all applicable hosts.

  Exclude Devices. Select to build or apply an exclusion list.

• Click Apply this Threshold to Specific Devices to choose the hosts to which the threshold applies.

  Note: Configure the threshold check interval for a longer time than the sampling interval for thresholds relating to trends, such as percent utilization. Configure it for a time the same as (or similar to) the sampling interval when configuring a threshold for a health check.

Tip: Avoid setting the threshold check interval to a very short time. Aggressive intervals can degrade system performance. In general, setting the threshold check interval to less than five minutes is not advised.

Track incidents that occur which are normally ignored due to blackout policy rules.

Alerts when a blackout period has ended and an action would have been triggered by a passive monitor or state change

Configure a Blackout Summary threshold:

• Name. Used in the Threshold library and the title on the Alert Center Dashboard.
• Notification Policy. (Optional) Select the notification policy to apply to this threshold. The policy initiates notifications when an item is outside the configured threshold limits.
• Threshold Check Interval. Enter a time interval for Alert Center to check the Network Performance Monitor database for items that are out of the threshold limits.

  Automatically resolve items no longer out of threshold. Select this option if you want Alert Center to automatically resolve items when they return to the value within the threshold limit.

Note: Notification policies are optional for most thresholds. If you do not select a notification policy, no notifications are generated for the threshold, but a dashboard report listing the out of threshold items still appears on the Alert Center Home page.

Note: You cannot configure threshold criteria for the Blackout Summary threshold.

Select Applied Devices

• Apply to All Devices. By default, the threshold monitors all applicable hosts.

  Exclude Devices. Select to build or apply an exclusion list.

• Click Apply this Threshold to Specific Devices to choose the hosts to which the threshold applies.

  Note: Configure the threshold check interval for a longer time than the sampling interval for thresholds relating to trends, such as percent utilization. Configure it for a time the same as (or similar to) the sampling interval when configuring a threshold for a health check.

Tip: Avoid setting the threshold check interval to a very short time. Aggressive intervals can degrade system performance. In general, setting the threshold check interval to less than five minutes is not advised.

Clone a threshold based on a custom or built-in configuration:

1. Click on a threshold on the Thresholds Library panel you want to copy.
2. Click the Copy button, and click OK to create a new Blackout Summary Threshold.

   The Edit Blackout Summary Threshold dialog displays.

3. Save or customize your new threshold, either:
   • Type in a new value for Name field (or keep the default) and click OK to save to the Thresholds Library.
   • Follow the Edit Blackout Summary Threshold instructions.

Delete an existing Blackout Summary Threshold:

1. Select Blackout Summary Threshold you want to delete from the Blackout Summary Threshold panel.
2. Click the Delete button, and then click Yes to confirm the deletion.

   The Blackout Summary Threshold configuration is deleted.