Add / Edit E-mail Alias

How to get here

Step 1: Enter Alias Name, select Alias Type, then click Save.

Type list:

• Standard Alias
  • Alias Name. Displays the name of the new alias. Aliases are limited to 45 characters and must be created from the character set of A-Z, a-z, 0-9, - (hyphen) and _ (underscore). The name cannot contain spaces and must be unique for the mail domain .
  • Type. Drop down menu displaying the alias type.
  • Resolves To. Place one complete mail address per line (no spaces). Enter an e-mail address on each line (for example, userid@domain.com ).

    Important: If you enter more than four e-mail addresses, the standard alias is converted to a group alias.

• Group Alias
  • Alias Name. Displays the name for the new alias. Aliases are limited to 45 characters and must be created from the character set of A-Z, a-z, 0-9, - (hyphen) and _ (underscore). The name cannot contain spaces and must be unique for the mail domain.
  • Type. Drop down menu displaying the alias type.
  • Resolves To. Enter an e-mail address per line (no spaces). Enter an e-mail address on each line (for example, userid@domain.com ).
• Program Alias
  • Alias Name. Displays the name for the new alias. Aliases are limited to 45 characters and must be created from the character set of A-Z, a-z, 0-9, - (hyphen) and _ (underscore). The name cannot contain spaces and must be unique for the mail domain.
  • Type. Drop down menu displaying the alias type.
  • Resolves To. Enter the program path, filename, and other required command line parameters to be executed when the program alias receives mail. When an e-mail is sent to the program alias, the executable program is invoked and the entire contents of the message are passed to the program to take specified actions on the e-mail.
• Beeper
  • Alias Name. Enter the name for the new alias. Aliases are limited to 45 characters and must be created from the character set of A-Z, a-z, 0-9, - (hyphen) and _ (underscore). The name cannot contain spaces and must be unique for the mail domain.
  • Type. Displays the alias type.
  • Phone Number. Enter the phone number to dial, including the area code.
  • Numeric. Enter a numeric code if required.
  • COM Port . Select the device's COM port.
  • Baud Rate. Select the device's baud rate .
  • Email Address. Enter an e-mail address if you want to send a copy of the message to another address.
• Pager
  • Alias Name. Enter the name for the new alias. Aliases are limited to 45 characters and must be created from the character set of A-Z, a-z, 0-9, - (hyphen) and _ (underscore). The name cannot contain spaces and must be unique for the mail domain.
  • Type. Displays the alias type.
  • Phone Number. Enter the phone number to dial, including the area code.
  • Password. Enter the password for the pager, if required.
  • Pager ID. Enter the pager ID.
  • Maximum Size. Enter the maximum number of characters for a message.
  • Parity. Select the correct number of data bits, parity bits, stop bits for Step the device. The TAP The Syslog (also known as the UNIX System Logger or GNU/Linux System Logger) is the system resource for all messages or errors generated by UNIX based systems. In addition to any UNIX computers, hardware components such as routers and firewalls, even on Windows-based networks, can generate Syslog messages. protocol uses 7, E, 1.
  • Protocol. Select the protocol. This is determined by the paging service provided you use. TAP is typical for U.S. paging systems, NTT is primarily used for Japanese paging systems, and UCP-SMS is typical for European SMS paging systems.
  • COM Port. Select the modem's COM port.
  • Baud Rate. Select the speed that the serial port will communicate with the modem.
  • Email Address. Enter an e-mail address if you want to send a copy of the message to another address.

Step 3: Click Finish.

Related Topics

Learning About Aliases

Creating "nobody" Alias