Interface Discards

Interface Discards reports reveal measurements for dropped or untransmitted network traffic across one or more network interfaces for each device or device group you specify. Packets can be routinely discarded due to policy, hardware faults, network outages, and so on.

Min Received. Fewest incoming packets discarded over a one minute interval specified period.
Max Received. Largest number of incoming packets discarded per minute for the specified period.
Avg Received. Average number of discarded incoming packets per minute for the specified period.
Min Untransmitted. Fewest outgoing packets discarded over a one minute interval specified period.
Max Untransmitted. Largest number of outgoing packets discarded per minute for the specified period.
Avg Untransmitted. Average number of outgoing packets discarded per minute for the specified period.

Generate a report

Choose device. Choose one or more host devices you want to see Interface Discards measurements for.

Choose time constraints. Choose times for the Interface Discards. (For recently observed measurements, select Last Polled from the Date Range drop down list.)

Filter and reduce by row and by column. Sort and remove columns, group rows based on specific column values, and remove noise and chaff from the table.

Chart, adjust output, and visualize. Fine tune report presentation and range of values displayed using the Report Settings dialog (optional).

Note: This report only returns Interface Discards metrics for devices that already have the appropriate WMI or SNMP credentials. For more information, see Using Credentials.

Print, share, and export

Generated Interface Discards report data can be visualized, shared, and reused:

Print. Print grid and chart views.
Share. Share Interface Discards reports with other users in a single or combined view.
Export. Export Interface Discards data and leverage outside of WhatsUp Gold.

Control	Purpose
Device	Browse and choose a single device.
Single Interface	Choose an interface on a device.
Device Group	Choose an existing group of one or more devices. You can also create custom or dynamic groups.

Control	Purpose
Date Range	Choose or define an overall date range.
Business hours	Focus on specific days of the week and periods within each day. Reveal trends that are sensitive to business hours, time zones, and other periodic attributes in the observed data.

Control	Purpose
Sort.	Sort column in ascending or descending order.
Columns.	Pick the columns you want to view. Click a check box to display the column. Clear the check box to hide it.
Group by this field.	Group table into collapsible rows wherever the current column contains identical data ("field") values.
Filters.	Provide a keyword to view only rows that contain the keyword for this column.

Control	Purpose
Show Top n Items	Limit items to the samples with the highest utilization.
Threshold Type	Switch between minimum or maximum mode for cutoff values for the ranked list. At or Over. Show peak usage period. (Utilization percentage equal to or greater than Threshold.) At or Under. Show usage periods where resources are unused or possibly down. (Utilization percentage equal to or less than Threshold.)
Threshold (percent)	Baseline value used to trim devices at peak or subpeak capacity from the Top n list.

Control	Purpose
Display Options	Present data as a chart, a table grid, or both.
Chart Type	Line/Area. Scatter graph that connects adjacent measurements with straight lines. Spline/Area Spline. Choose a graph with a smoothed appearance where adjacent samples exhibit a gradual slope.
Chart Options (percent)	Legend, Grid Lines, Range Selector. Include legend, grid lines, and range selector for readability. Trend Lines. Present data with a smoothed average to show trend.

Interface Discards

Generate a report

Choose time constraints for data view

Filter and pick by column

Specify threshold and top n:

Chart and visualize data over time (time series graph)

Print, share, and export