Performance: Group Memory Utilization

This group report displays memory utilization data collected during the selected time period from the devices in the group shown at the top of the report. You can configure the data collection for your devices through Device Properties > Performance Monitors > Configure Memory Utilization.

Report Body

Below the date/time picker is a table showing the total number of devices in the group that are collecting data for the time period chosen, the total amount of memory that is available, and the amount that is was in use across those devices.

Below the summary table, the report displays the memory utilization statistics collected during the time period:

Device. The name and IP address of the device.
Description. The description of the type of memory on that device.
Size. The total amount of memory on the device being monitored.
Used. The amount of memory in use on the device.
% Used. The utilization percentage of the memory for the device.

Note: Click the device name to access the Device Status report, and click the description to view the Memory Utilization report for that device.

Note: Values displayed in the table are the average values for the selected time period. Values displayed in the summary are the minimum, maximum, and average values for the selected time period. If raw polling data has been averaged into hourly or daily summarized data, the values for min and average, or maximum and average can be different. In some cases, they may be very different if there was a period of time when polled values were much higher or lower than normal.

You can verify your report rollup settings on the WhatsUp Gold console via Program Options > Report Data.

Split Second Graphs

To see a real-time graph for a device's memory utilization, hover over the memory's description in the Description column.

Note: When viewing information for devices running Microsoft Windows, information gathered via WMI is displayed in real time. Information gathered by SNMP, however, may reflect a delay of one minute or more. This delay is caused by a limitation in how often Microsoft Windows updates SNMP values.

Note: Split Second Graphs are not available in VMware host reports.

Thresholds

Report percentages are displayed in colors that represent the CPU utilization thresholds:

Red. above 90%
Yellow. above 80%
Green. 80% or less

Report date

Use the date/time picker at the top of the report to select a date range and time frame.

In the Date range list, some reports also allow you to specify and customize the business hour report times for reports to display. This allows you to view the network activity only for specified business hours. The date and time format for the date on this report matches the format specified in Program Options > Regional set in the WhatsUp Gold console.

Paging Options

At both the bottom and the top of the report table exist report paging controls that allow you to move through extensive amounts of report data with ease. First, use the Page list to select the specific page for which to view report data. Next, use the Showing ___ rows per page list to specify the number of rows that you would like displayed in the report. You can choose to display 25, 50, 1000, 250, or 500 rows. The default maximum is 50 rows. Finally, the Paging buttons allow you to move from page to page, or go to the first or last page.

	Use to go to the first record.
	Use to go to previous records.
	Use to go to next records.
	Use to go to the last record.

Changing how the chart looks

Click the Chart Properties button to change how the report chart is displayed.

Navigation

You can change the group you are viewing by clicking the group name in the application bar at the top of the page.

You can change to another group report by selecting one from the More Group Reports list.

Printing

You can print a fully formatted report through your browser by clicking the print icon in the browser's toolbar, or selecting File > Print from the browser's menu.

Toolbar buttons

Use the following toolbar buttons to manage report exports, schedule report emails, and get application help.

Click this icon to add the current report to:

your Favorites list (available in full reports).
Tip: After selected, Favorite reports can be accessed from the Reports > Favorites folder of the WhatsUp section of the GO Menu.
export the report to a file (Text, Microsoft Excel, or PDF available in full reports and PDF available in workspace reports).
email a report as a PDF attachment.
schedule reports to be emailed.
Note: JavaScript must be enabled on your browser for this feature to work.

Click this button to view the help for this report.

Click this icon to view help for the current report.