Wireless Clients: Specific Client

The Wireless Clients: Specific Client displays a suite of reports that present identifying and connection information specific to the individual client selected from within the Wireless Clients report. If the client name is not available or cannot be determined, the client's MAC address is displayed. The client name is determined by Wi-Fi authentication and may not be present under all authentication schemes. Please note, if a client is displayed as 0.0.0.0, this indicates the device's controller is unable to obtain its IP address or the access point cannot determine it.

The Bandwidth chart displays traffic in and out.

The Session Details chart displays the following information:

• IP Address. IP Address assigned to the wireless client.
• SSID. SSID of the connected access point.
• Device. Access point to which the client connected
• First Seen. Date and time when the client first connected.
• Last Seen. Date and time when the client disconnected.
• Bytes Sent. Total data sent.
• Bytes Received. Total data received.
• % Connected. Percent of the interval connected between the first seen and last seen marks.

The Associations chart displays connection time by percentage for each associated access point and SSID.

The RSSI and SNR chart displays radio signal strength indicator and signal to noise ratio percentages.

Please note, this dashboard is completely static. Additional reports cannot be added and the charts described previously cannot be removed. Only the device(s) displayed (), reporting time frame ().

See Also Wireless Reporting Wireless Bandwidth Utilization Bandwidth Summary Wireless CPU Utilization Client Count Wireless Wireless Memory Utilization RSSI Rogue Count Signal to Noise Ratio Wireless System Summary Wireless Rogue Setting Wireless Clients