Rogue Count
Rogue Count report reveals the names of unknown ("rogue") wireless end stations connected to the access point you specify.
- . Device name or IP address of access point.
- . Average number of unknown ("rogue") wireless end stations connected to the access point during the specified time frame.
: The rogue count displayed in the Wireless Rogue Count dashboard report represents the average number of rouges seen by the specified access point(s) within the selected timeframe. However, the rogue count displayed in the Wireless System Summary dashboard report represents the total number of rogue end stations seen on the network.
Generate a report
. 
Choose one or more host devices you want Rogue Count measurements for.
Use the Select Device dialog for one of the following:
Control
|
Purpose
|
Device 
|
Browse and choose a single device.
|
Device Group 
|
Choose an existing group of one or more devices. You can also create custom or dynamic groups.
|
: You can organize devices into custom or dynamic groups. For more information, see Grouping Devices.
: If a device is identified as a virtual machine, Hyper-V or VMware credentials will be used to retrieve data and only those physical resources allocated to the virtual machine will be visible in the report.
. 
Sort and pick columns.
Filter and pick by column
Click a report heading 
and use the following from the drop down list:
Control
|
Purpose
|
Sort. 
|
Sort column in ascending or descending order.
|
Columns. 
|
Pick the columns you want to view. Click a check box to display the column. Clear the check box to hide it.
|
.
Fine tune report presentation and range of values displayed using the Report Settings dialog (optional).
Specify threshold and top n:
Control
|
Purpose
|
Show Top n Items
|
Limit items to the samples with the highest (or lowest) utilization.
|
Threshold Type
|
Switch between minimum or maximum mode for cutoff values for the ranked list.
- At or Over. Show peak usage period. (Utilization percentage equal to or greater than Threshold.)
- At or Under. Show usage periods where resources are unused or possibly down. (Utilization percentage equal to or less than Threshold.)
|
Threshold (percent)
|
Baseline value used to trim ranked device list based on peak or subpeak capacity when returning the Top n.
|
Chart and visualize data over time (single device )
Charting and visualization is available when you select a single device.
Control
|
Purpose
|
Display Options
|
Present data as a chart, a table grid, or both.
|
Chart Type
|
- Gauge charts. Available when you select a Date Range of
 . - Time series. Available when you select a Date Range interval (, for example).
- Line/Area. Scatter graph that connects adjacent measurements with straight lines.
- Spline/Area Spline. Choose a graph with a smoothed appearance where adjacent samples exhibit a gradual slope.
|
Chart Options
|
- Legend, Grid Lines, Range Selector. Include legend, grid lines, and range selector for readability.
- Trend Lines. Present data with a smoothed average to show trend.
|
: Trend lines represent a moving average that can be compared with line and area graphs to reveal peak and sub peak intervals, periods of burstiness, latency, and interruption.
: This report only returns Rogue Count metrics for devices that already have the appropriate WMI or SNMP credentials. For more information, see Using Credentials.
Share, export, and save as PDF
Most generated Rogue Count report data can be printed, shared, and exported when selecting (
) from the Dashboard Options (
) menu. After the report has been expanded, select export (
) to access the following options:
Choose Device.