Summary Counts (Remote)

Summary Counts (Remote) report reveals device health for a selected group at a glance.

Devices in Group. Total devices in group.
Monitored Devices. Count of devices with monitoring applied.
Up Devices. Count of devices in Up state.
Down Devices. Count of devices in Down state.
Devices with Down Active Monitors. Count of devices with active monitors in Down state.
Devices in Maintenance. Count of devices in Maintenance mode.
Enabled Active Monitors. Total active monitors enabled on this group.
Up Active Monitors. Total active monitors polling in an Up state.
Down Active Monitors. Total active monitors polling in a Down state.
Down Critical Monitors. Total critical monitors polling in a Down state.
Up Interfaces. Interfaces in Up state.
Down Interfaces. Interfaces in Down state.
Unacknowledged Devices. Devices with alerts in the Unacknowledged state.
Actions Fired in Last 4 Hours. Count of device events that caused actions to fire in the last 4 hours.

Generate a report

Choose WhatsUp Gold Environment. Choose the remote WhatsUp Gold environment.

Choose Device. Choose one or more host devices you want Summary Counts (Remote) measurements for.

Chart, adjust output, and visualize. Fine tune report presentation and range of values displayed using the Report Settings dialog (optional).

Note: This report only returns Summary Counts (Remote) metrics for devices that already have the appropriate WMI or SNMP credentials. For more information, see Using Credentials.

Share, export, and save as PDF

Most generated Summary Counts (Remote) report data can be printed, shared, and exported when selecting Expand () from the Dashboard Options () menu. After the report has been expanded, select export () to access the following options:

Export to PDF. Generate a PDF file of the report with user-defined page size and orientation.
Export Data. Export Summary Counts (Remote) data and leverage outside of WhatsUp Gold.
Schedule Export. Set a recurring date and time, format, and email destination for report data export.

Control	Purpose
Select environment.	Choose an observation point from the list of configured WhatsUp Gold environments.

Control	Purpose
Device	Browse and choose a single device.
Single Interface	Choose an interface on a device.
Device Group	Choose an existing group of one or more devices. You can also create custom or dynamic groups.

Control	Purpose
Show Top n Items	Limit items to the samples with the highest (or lowest) utilization.
Threshold Type	Switch between minimum or maximum mode for cutoff values for the ranked list. At or Over. Show peak usage period. (Utilization percentage equal to or greater than Threshold.) At or Under. Show usage periods where resources are unused or possibly down. (Utilization percentage equal to or less than Threshold.)
Threshold (percent)	Baseline value used to trim ranked device list based on peak or subpeak capacity when returning the Top n.

Control	Purpose
Display Options	Present data as a chart, a table grid, or both.
Chart Type	Gauge charts. Available when you select a Date Range of Last Polled . Time series. Available when you select a Date Range interval (Today , for example). Line/Area. Scatter graph that connects adjacent measurements with straight lines. Spline/Area Spline. Choose a graph with a smoothed appearance where adjacent samples exhibit a gradual slope.
Chart Options	Legend, Grid Lines, Range Selector. Include legend, grid lines, and range selector for readability. Trend Lines. Present data with a smoothed average to show trend.

Summary Counts (Remote)

Generate a report

Select WhatsUp Gold environment

Specify threshold and top n:

Chart and visualize data over time (single device )

Share, export, and save as PDF