Step 2: Configure the Gateway Connection on the MOVEit Transfer Server

Use the MOVEit Transfer Config Utility to configure a secure connection with MOVEit Gateway.

Note: The Gateway tab is displayed if your MOVEit Transfer license supports MOVEit Gateway.

1. Open the MOVEit Transfer Config Utility and select the Gateway tab. For information about the configuration options, see Gateway Tab Configuration.

   

2. Click Enabled to choose an SSH tunnel communication between MOVEit Transfer and MOVEit Gateway.
3. In Gateway Settings, enter the MOVEit Gateway hostname.
4. To use the existing SSH Auth Key, click View and then Copy to Clipboard to copy the public key for MOVEit Transfer. To generate a new SSH Auth Key, click Generate New Key.

   You need to copy this key into MOVEit Gateway. Save it to a file or copy it to MOVEit Gateway now.

   

5. Choose the MOVEit Transfer services (HTTPS, FTP, SSH) you will use through the MOVEit Gateway. (Select Enabled checkbox to add the service or clear the checkbox to remove the service.)
6. To use these settings and start the Gateway Tunnel listener on MOVEit Transfer, click Apply.
7. If you generated a new SSH Auth Key, you must restart the Gateway SSH Tunnel Management Service. Select the Status tab on the MOVEit Transfer server Config Utility, and under Licensed Services start/restart the Gateway SSH Tunnel Management Service.

   

   Only enable the services you need to run.