Configuring a Flow Monitor Interface Traffic threshold

To configure a Flow Monitor interface traffic threshold:

  1. From the WhatsUp Gold web interface, go to Alert Center > Threshold Library. The Alert Center Threshold Library dialog appears.
  2. Click New. The Select Threshold Type dialog appears.
  3. Select Flow Monitor Interface Traffic, then click OK. The New Flow Monitor Interface Traffic Threshold dialog appears.

    The New Flow Monitor Interface Traffic Threshold dialog

  4. Specify or select the appropriate information in the dialog box:
    • Name. Specify a name for the threshold. This name helps you identify the threshold in the Threshold library and displays as the report title on the Alert Center Home page.
    • Threshold. Select and enter the desired threshold criteria variables and values. The default threshold is configured to alert when incoming or outgoing interface traffic exceeds 90% for more than 60 minutes.
    • Traffic to monitor. Select the Flow Monitor sources from which to monitor traffic; all interfaces on a Flow source are monitored. By default, the threshold is set to monitor traffic from all Flow sources.
    • Notification. Select the notification policy to apply to this threshold. This policy begins sending notifications when an item is outside the configured threshold limits. If you do not see an appropriate threshold policy, or if the list is empty, click browse (...) to open the Notification Policy dialog and configure a new policy.

    Note: Notification policies are optional for most thresholds. If you do not select a notification policy, no notifications are generated for the threshold, but a dashboard report listing the out of threshold items still appears on the Alert Center Home page.

    • Threshold check. Enter a value for the threshold check interval, or the interval at which the Alert Center checks the WhatsUp Gold database to see if there are items that are outside the threshold parameters.
    • Select Automatically resolve items no longer out of threshold to have Alert Center automatically resolve items when they go back inside the parameters of the threshold.

    Note: Configure the threshold check interval for a longer time than the sampling interval for thresholds relating to trends, such as percent utilization. Configure it for a time the same as (or similar to) the sampling interval when configuring a threshold for a health check.

    Avoid setting the threshold check interval to a very short time as this can degrade system performance. In general, setting the threshold check interval to less than five minutes is inadvisable.

  5. Click OK to save the threshold settings.

See Also

Configuring Flow Monitor thresholds

Configuring Flow Monitor thresholds

Selecting Flow Monitor threshold hosts

Configuring a conversation partners threshold

Configuring a Flow Monitor custom threshold

Configuring a failed connections threshold

Configuring a top sender/receiver threshold