WhatsUp Gold Failover Console

This is the main dialog of the WhatsUp Gold Failover Console.

Use this dialog to view the current status of the primary and secondary WhatsUp Gold machines and to select the active WhatsUp Gold machine.

The dialog displays the following information for the primary and secondary WhatsUp Gold machines:

Host. The machine's host address.
Status. The machine's current status. Can either be:
Active - currently polling the network.

Standby - ready to assume network polling duties if/when the active machine goes down.

Down - unable to perform network polling duties.

Unknown - status is not known to Failover.
Communication State. The communication state is listed from the point of view from the other machine. For example, if the primary machine has attempted to communicate with the secondary machine and is unable to for some reason, the communcation state is listed as Unknown. Can either be:
Unknown - a machine is unable to communicate with the other machine for an unknown reason.

Connection failed - a machine is unable to communcate with the other machine because the other machine is not known to exist from the machine's standpoint (no known host, etc.).

Service running - a machine has communicated with the other machine and finds that the Failover service is running.

Good credential - a machine has communicated with the other machine and finds a good credential for further heartbeat communication.

Bad credential - a machine has communicated with the other machine and while the machine does in fact exist, the credentials provided for communication are bad.
Last Active. The last time the machine successfully sent a heartbeat message to the other machine.

Tip: Click Configure to set up the Failover Service Monitor.